Printing Collages of Photos and Background Patterns

You can print photos on a memory device by creating a layout and adding a background design.

1. Load paper in the printer.

   Loading Paper in the Paper Cassette 1

   Loading Paper in the Paper Cassette 2

   Loading Paper in the Rear Paper Feed Slot

2. Insert a memory device into the SD card slot or the external interface USB port of the printer.

   Inserting a Memory Card

   Inserting an External USB Device

3. Select Print Photos on the control panel.

4. Select Collage > Photo Collage.

5. Select the layout.

6. Select the type of background you want to use. This may not be available for some layouts.

   • Design
     Select the pattern, such as borders or polka dots, or Original Design, and then select the pattern you created using the design paper feature.
   • No Background
     Go to the next step.

7. When a message telling you that loading photos is complete is displayed, select OK.

8. Do one of the following.

   • When you select single photo layout in step 5: Select , select one photo on the select photo screen, and then select Next. Go to step 13.
   • When you select multiple photo layout in step 5 and place photos automatically: Select Automatic Layout, select photos on the select photo screen, and then select Next. Go to step 13.
   • When you select multiple photo layout and place photos manually: Go to the next step.

9. Select .

10. Select the photo you want to print on the select photo screen, and then select Done.

    Select Single View, and then select to edit the photo if necessary.

    Menu Options for Editing Photos

11. Repeat steps 9 to 10 until all photos are placed.

12. Select Next.

13. Make the settings on the Basic Settings tab, and then set the number of copies.

    Menu Options for Paper and Print Settings

14. Select Advanced Settings tab, and then change the settings as necessary.

15. Select Basic Settings tab, and then tap .