AM-C6000 Series/AM-C5000 Series/AM-C4000 Series

User's Guide

> Introduction of Advanced Features > IP Fax > Making IP Fax Features Available > Settings for Using IP Fax > Batch Setting Using Epson Device Admin (Configuration Template) > Enabling Sending and Receiving IP Faxes Using G3 Fax-compatible Devices (Through a VoIP Gateway) <Epson Device Admin> > Registering a VoIP Gateway <Epson Device Admin>

Registering a VoIP Gateway <Epson Device Admin>

Register the VoIP gateway you want to use to send and receive IP faxes.

Select Fax > IP-FAX Settings > VoIP Gateway Settings from the configuration template, and then set the VoIP gateway registration together with other VoIP gateway settings.

  1. Select the item that you want to register in the Registered VoIP Gateway list, and then click Edit.

    The Registered VoIP Gateway screen is displayed.

  2. Set each item.

    • Name
      Enter the name of the VoIP gateway using up to 30 characters that can be expressed in UTF-16. However, control characters (0x00 to 0x1F and 0x7F) cannot be used.
    • IP Address
      Enter the host name or IP address for the VoIP gateway. You can enter 0 to 127 characters that can be expressed in ASCII (0x20 to 0x7E). However, you cannot use whitespaces or the following characters: "<>\^`{¦}
    • Port Number
      Enter the port number for the VoIP gateway using single-byte numbers within a range of 1 to 65535.

  3. Click OK.

Note:

  • To change the VoIP gateway registration information, select the item that you want to change in the Registered VoIP Gateway list, and then click Edit.

  • To delete the VoIP gateway registration information, select the item that you want to delete in the Registered VoIP Gateway list, and then click Delete.

  • To delete all of the VoIP gateway registration information, click Delete All in the Registered VoIP Gateway list.

Related Information