/ Faxing / Sending Faxes Using the Printer / Various Ways of Sending Faxes / Sending Different Size Documents Using ADF (ADF Continuous Scan)

Sending Different Size Documents Using ADF (ADF Continuous Scan)

Sending faxes by placing originals one by one, or by placing originals by size, you can send them as one document at their original sizes.

If you place different sized originals in the ADF, all of the originals are sent at the largest size among them. To send originals at their original sizes, do not place originals with mixed sizes.

Place the first batch of originals at the same size.
Select Fax on the home screen.

To select an item, use the buttons, and then press the OK button.
Specify the recipient.
Select the Fax Settings tab, and then select ADF Continuous Scan to set this to On.

You can also make settings such as the resolution and the sending method as necessary.
Press the (Send) button.
When scanning the first set of originals is complete and a message is displayed on the control panel asking you to scan the next set of originals, select Yes, set the next originals, and then press the button.

Note:

If you leave the printer untouched for 20 seconds after prompted to set the next originals, the printer stops storing and starts sending the document.