/ Network Settings / Connecting to a Smart Device / Connecting to Android Devices using Wi-Fi Direct

Connecting to Android Devices using Wi-Fi Direct

This method allows you to connect the printer directly to your Android device without a wireless router. The following conditions are required to use this function.

Android 4.4 or later
Epson iPrint version 7.0 or later

Epson iPrint is used to print from a smart device. Install Epson iPrint on the smart device in advance.

Note:

You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.

Select on the home screen.

To select an item, use the buttons, and then press the OK button.
Select Wi-Fi Direct.
Press the OK button.
Select Android.
On the smart device, start Epson iPrint.
On the Epson iPrint screen, tap Printer is not selected..
Select the printer that you want to connect to.

See the information displayed on the printer's control panel to select the printer.

Note:

Printers may not been displayed depending on the Android device. If printers are not displayed, connect by selecting Other OS Devices. See "Related Information" below for connecting.
When the device connection approval screen is displayed, select Approve.
When the device registration confirmation screen is displayed, select whether you register the approved device to the printer.
On the printer's control panel, select Complete.

For smart devices that have been connected to the printer before, select the network name (SSID) on the smart device's Wi-Fi screen to connect them again.