1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. User setup »
  6. GS ( E   <Function 7>

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20X
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82X
  • TM-T83III
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS ( E   <Function 7>

[Name]

Copy the user-defined page

[Format]

ASCII
   
GS
  
(
  
E
  
pL
  
pH
  
fn
  
a
  
d1
  
d2
Hex
1D
28
45
04
00
07
a
d1
d2
Decimal
29
40
69
4
0
7
a
d1
d2

[Range]

(pL + pH × 256) = 4
fn = 7
d1 = 30, 31
d2 = 30, 31 (d1 ≠ d2)
a: different depending on the printers

[Description]

Copies the data in the user-defined code page.
  • Font number is specified by a.
  • a
    User defined code page
    Number of horizontal dots
    Number of vertical dots
    10
    Font configuration 9 × 14 (page 255)
    9
    17
    12
    Font configuration 12 × 24 (page 255)
    12
    24
    17
    Font configuration 8 × 16 (page 255)
    8
    16
    18
    Font configuration 10 × 24 (page 255)
    10
    24
  • Copy operation is specified by d1, d2.
  • d1
    d2
    Copy operation
    31
    30
    Copy the font number data (a) from the storage area into the work area
    30
    31
    Copy the data from the work area into the storage area specified by font number (a)

[Notes]

  • This function works in user setting mode.
  • User defined code pages are page 255 or page 254 in the character code pages of alphanumeric Katakana characters built in the printer. Character data defined in the user-defined code page can be printed by specifying the character code after selecting the page with ESC t.
  • Work area means RAM area that is used to edit character data.
  • Storage area means non-volatile memory area that is used to store page data of user-defined code pages.
  • Character data can be specified as follows:
  • Procedure
    Processing
    Used function
    1
    Shifts to the user setting mode
    2
    Copy data from storage area into work area
    GS ( E   <Function 7> (d1 = 31, d2 = 30)
    3
    Change pattern of the character data
    4
    Copy data from work area into storage area
    GS ( E   <Function 7> (d1 = 30, d2 = 31)
    5
    Exit user setting mode
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. User setup »
  6. GS ( E   <Function 7>

Jump to the top