Select your printer model

Parameters are refined by the selected printer.

EU-m30
TM-J2000
TM-J2100
TM-L90
TM-L90 LFC
TM-L100
TM-m10
TM-m30
TM-m30II
TM-m30II-H
TM-m30III
TM-m30III-H
TM-m30II-NT
TM-m30II-S
TM-m30II-SL
TM-m50
TM-m50II
TM-m50II-H
TM-P20
TM-P20II
TM-P60
TM-P60II
TM-P80
TM-P80II
TM-T20
TM-T20II
TM-T20III
TM-T20IIIL
TM-T20X
TM-T70
TM-T70II
TM-T81III
TM-T82II
TM-T82III
TM-T82IIIL
TM-T82X
TM-T83III
TM-T88IV
TM-T88V
TM-T88VI
TM-T88VII
TM-T90
TM-T100
TM-U220
TM-U220II
TM-U230

GS ( H <Function 49>

[Name]

Specifies the offline response

[Format]

ASCII	GS	(	H	pL	pH	fn	m	d
Hex	1D	28	48	03	00	31	30	d
Decimal	29	40	72	3	0	49	48	d

[Range]

(pL + pH × 256) = 3

fn = 49

m = 48

d = 0 – 2, 48 – 50

[Default]

d = 0

[Description]

Specifies or turns off the offline response transmission.

d	Function
0, 48	Turns off the offline response transmission.
1, 49	Specifies the offline response transmission (not including the offline cause).
2, 50	Specifies the offline response transmission (including the offline cause).

When specifying offline response transmitting (d = 1, 2, 49, 50), offline response is transmitted when the printer goes offline for any of the following causes.

Any paper cover open
Printing stop because of paper out
Automatically recoverable error
Recoverable error
Unrecoverable error

[Notes]

Confirm that untransmitted offline responses aren't stored in the printer when specifying or turning off offline response transmitting by this function.
- When operating with a serial interface, make sure that the host PC is able to receive data before executing this function.
- When operating with a parallel interface, change the host PC to the reverse mode for confirming any responses.
Offline response is the "header to NUL" data shown below:

Send data	Hex	Decimal	Number of bytes
Header	37h	55	1 byte
Identifier	23h	35	1 byte
Offline cause (∗1)	40h – 7Fh	64 – 127	0 – 10 byte
NUL	00h	0	1 byte

Send data

Hex

Decimal

Number of bytes

Header

37h

1 byte

Identifier

23h

1 byte

Offline cause (∗1)

40h – 7Fh

64 – 127

0 – 10 byte

NUL

00h

1 byte

(∗1) When specifying (d = 1, 49), [Offline cause] is not added. Details of the offline cause differ, depending on each model.
When transmitting an offline response occurs at the same time that an untransmitted offline response is being stored, the printer transmits the latest offline response only.
You can get detailed information of offline occurrences by using the combination of ASB status and offline response with offline cause.
When specifying offline response by this function, execute response confirmation processing on the host PC for the responses from the printer.
See program example and print sample for ESC i [obsolete command] and ESC m [obsolete command] for description of response transmission process.

, TM-L90:

For the TM-L90 with Peeler, this function applies to the roll paper cover.

The offline cause of this printer is constructed of 5 bytes as shown in the following tables.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	CPU execution error hasn't occurred.
0	1	01	1	CPU execution error has occurred.
1	0	00	0	ROM error hasn't occurred in the memory.
1	1	02	2	ROM error has occurred in the memory.
2	0	00	0	G/A error hasn't occurred in the gate array.
2	1	04	4	G/A error has occurred in the gate array.
3 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When one of above errors occurs, turn off the printer immediately.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	High voltage error hasn't occurred.
0	1	01	1	High voltage error has occurred.
1	0	00	0	Low voltage error hasn't occurred.
1	1	02	2	Low voltage error has occurred.
2	0	00	0	Over current error hasn't occurred.
2	1	04	4	Over current error has occurred.
3 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When one of above errors occurs, turn off the printer immediately.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	Thermostat error hasn't occurred.
0	1	01	1	Thermostat error has occurred.
1 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When one of above errors occurs, turn off the printer immediately.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	Autocutter error hasn't occurred.
0	1	01	1	Autocutter error has occurred.
1	0	00	0	Roll paper cover open error hasn't occurred. (When Msw [8-8] is ON)
1	1	02	2	Roll paper cover open error has occurred. (When Msw [8-8] is ON)
2	0	00	0	Roll paper layout error hasn't occurred.
2	1	04	4	Roll paper layout error has occurred.
3 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

Bit 0 is not supported by the TM-L90 with Peeler.

When the error of bit 0 or bit 1 occurs, the error can be canceled by executing DLE ENQ (n = 2) after clearing the error cause.

When the error of bit 2 occurs, the error can be canceled by either of the following. See the printer information of GS ( E <Function 3> for memory switches details.

When memory switch [Msw8-2] is OFF: execution of DLE ENQ (n = 2) or opening/closing the cover

When memory switch [Msw8-2] is ON: execution of DLE ENQ (n = 2)

When memory switch [Msw8-1] is OFF: execution of DLE ENQ (n = 2) or pressing the paper feed button [TM-L90 with Peeler]

When memory switch [Msw8-1] is ON: execution of DLE ENQ (n = 2) [TM-L90 with Peeler]

Bit	Binary	Hex	Decimal	Function
0	0	00	0	Roll paper cover open error hasn't occurred. (When Msw [8-8] is OFF)
0	1	01	1	Roll paper cover open error has occurred. (When Msw [8-8] is OFF)
1	0	00	0	Print head high temperature error hasn't occurred.
1	1	02	2	Print head high temperature error has occurred.
2 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When the error of bit 0 occurs, the error can be canceled by closing the roll paper cover.

When the error of bit 1 occurs, the error is automatically canceled when the temperature of the print head returns to the specified temperature range.

, EU-m30:

The offline cause added to an offline response when (d = 2, 50) is specified will consist of 5 bytes as shown below.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	Software error (CPU execution error) hasn't occurred.
0	1	01	1	Software error (CPU execution error) has occurred.
1	0	00	0	Drive circuit error hasn't occurred in the memory.
1	1	02	2	Drive circuit error has occurred in the memory.
2 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When one of above errors occurs, turn off the printer immediately.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	High voltage error hasn't occurred.
0	1	01	1	High voltage error has occurred.
1	0	00	0	Low voltage error hasn't occurred.
1	1	02	2	Low voltage error has occurred.
2 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When one of above errors occurs, turn off the printer immediately.

Bit	Binary	Hex	Decimal	Information
0 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	Autocutter error hasn't occurred.
0	1	01	1	Autocutter error has occurred.
1 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When one of above errors occurs, the error can be canceled by executing DLE ENQ (n = 2) after clearing the error cause.

Bit	Binary	Hex	Decimal	Function
0	0	00	0	Roll paper cover open error hasn't occurred. (When Msw [8-8] is OFF)
0	1	01	1	Roll paper cover open error has occurred. (When Msw [8-8] is OFF)
1	0	00	0	Print head high temperature error hasn't occurred.
1	1	02	2	Print head high temperature error has occurred.
2 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When the error of bit 0 occurs, the error can be canceled by closing the roll paper cover.

When the error of bit 1 occurs, the error is automatically canceled when the temperature of the print head returns to the specified temperature range.

, TM-L90 LFC, TM-T90:

The offline cause of this printer is constructed of 5 bytes as shown in the following tables.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	CPU execution error hasn't occurred.
0	1	01	1	CPU execution error has occurred.
1	0	00	0	ROM error hasn't occurred in the memory.
1	1	02	2	ROM error has occurred in the memory.
2	0	00	0	G/A error hasn't occurred in the gate array.
2	1	04	4	G/A error has occurred in the gate array.
3 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When one of above errors occurs, turn off the printer immediately.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	High voltage error hasn't occurred.
0	1	01	1	High voltage error has occurred.
1	0	00	0	Low voltage error hasn't occurred.
1	1	02	2	Low voltage error has occurred.
2	0	00	0	Overcurrent error hasn't occurred.
2	1	02	2	Overcurrent error has occurred.
3 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When one of above errors occurs, turn off the printer immediately.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	Thermostat error hasn't occurred.
0	1	01	1	Thermostat error has occurred.
1 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When one of above errors occurs, turn off the printer immediately.

Bit	Binary	Hex	Decimal	Information
0	0	00	0	Autocutter error hasn't occurred.
0	1	01	1	Autocutter error has occurred.
1	0	00	0	Roll paper cover open error hasn't occurred. (When Msw [8-8] is ON)
1	1	02	2	Roll paper cover open error has occurred. (When Msw [8-8] is ON)
2 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When one of above errors occurs, the error can be canceled by executing DLE ENQ (n = 2) after clearing the error cause.

Bit	Binary	Hex	Decimal	Function
0	0	00	0	Roll paper cover open error hasn't occurred. (When Msw [8-8] is OFF)
0	1	01	1	Roll paper cover open error has occurred. (When Msw [8-8] is OFF)
1	0	00	0	Print head high temperature error hasn't occurred.
1	1	02	2	Print head high temperature error has occurred.
2 – 5	−	−	−	Reserved.
6	1	40	64	Fixed.
7	0	00	0	Fixed.

When the error of bit 0 occurs, the error can be canceled by closing the roll paper cover.

When the error of bit 1 occurs, the error is automatically canceled when the temperature of the print head returns to the specified temperature range.

Quick Access

[Name]
[Format]
[Range]
[Description]
[Notes]

ESC/POS^® includes patented or patent pending commands. The contents must not be disclosed to third parties.

ESC/POS^® Command Reference for TM Printers

Introduction
Command Lists
- Commands in Code Order
- Applicable printers
- Command List by Model
  - EU-m30
  - TM-J2000, TM-J2100
  - TM-L90
  - TM-L90 LFC
  - TM-L100
  - TM-m10
  - TM-m30
  - TM-m30II
  - TM-m30II-H
  - TM-m30II-NT
  - TM-m30II-S
  - TM-m30II-SL
  - TM-m30III
  - TM-m30III-H
  - TM-m50
  - TM-m50II
  - TM-m50II-H
  - TM-P20
  - TM-P20II
  - TM-P60
  - TM-P60II
  - TM-P80
  - TM-P80II
  - TM-T100
  - TM-T20
  - TM-T20II
  - TM-T20III
  - TM-T20IIIL
  - TM-T20X
  - TM-T70
  - TM-T70II
  - TM-T81III
  - TM-T82II
  - TM-T82III
  - TM-T82IIIL
  - TM-T82X
  - TM-T83III
  - TM-T88IV
  - TM-T88V
  - TM-T88VI
  - TM-T88VII
  - TM-T90
  - TM-U220
  - TM-U220II
  - TM-U230
- Obsolete Commands
Commands Arranged by Function
- Print Commands
  - LF
  - FF (in Page mode)
  - FF (in Standard mode)
  - CR
  - ESC FF
  - ESC J
  - ESC K
  - ESC d
  - ESC e
- Line Spacing Commands
  - ESC 2
  - ESC 3
- Character Commands
  - CAN
  - ESC SP
  - ESC !
  - ESC -
  - ESC E
  - ESC G
  - ESC M
  - ESC R
  - ESC V
  - ESC r
  - ESC t
  - ESC {
  - GS !
  - GS B
  - GS b
  - - Character effects
    - User-defined characters
      - ESC %
      - ESC &
      - ESC ?
    - Code conversion method
- Printing Paper Commands
  - Label and black mark control
- Print Position Commands
  - HT
  - ESC $
  - ESC D
  - ESC T
  - ESC W
  - ESC \
  - ESC a
  - GS $
  - GS L
  - GS T
  - GS W
  - GS \
- Paper Sensor Commands
  - ESC c 3
  - ESC c 4
- Mechanism Control Commands
  - ESC <
  - ESC U
  - ESC i
  - ESC m
  - ESC i
  - GS ( V <fn=48>
  - GS ( V <fn=49>
  - GS ( V <fn=51>
  - GS V
- Bit Image Commands
  - Bit Image
    - ESC *
    - FS p
    - FS q
    - GS *
    - GS /
    - GS Q 0
    - GS v 0
  - GS ( L / GS 8 L
  - GS D
  - Graphics
  - NV Graphics
  - Download Graphics
- Panel Button Commands
  - ESC c 5
- Status Commands
  - DLE EOT
  - ESC u
  - ESC v
  - FS ( e
  - GS a
  - GS j
  - GS r
- Barcode Commands
  - GS H
  - GS f
  - GS h
  - GS k
  - GS w
- Two-dimensional Code Commands
  - GS ( k
  - - PDF417
    - QR Code
    - MaxiCode
    - 2-dimensional GS1 DataBar
    - Composite Symbology
    - Aztec Code
    - DataMatrix
- Macro Function Commands
  - GS :
  - GS ^
- Kanji Commands
  - FS !
  - FS &
  - FS -
  - FS .
  - FS 2
  - FS ?
  - FS C
  - FS S
  - FS W
  - Kanji character effects
    - FS ( A
    - FS ( A <fn=48>
- Miscellaneous Commands
  - DLE ENQ
  - DLE DC4 <fn=1>
  - DLE DC4 <fn=2>
  - DLE DC4 <fn=3>
  - DLE DC4 <fn=7>
  - DLE DC4 <fn=8>
  - ESC ( Y
  - ESC =
  - ESC @
  - ESC L
  - ESC S
  - ESC p
  - GS ( A
  - GS ( D
  - GS I
  - GS P
  - GS g 0
  - GS g 2
  - GS z 0
  - Response or status transmission
    - GS ( H
    - GS ( H <fn=48>
    - GS ( H <fn=49>
  - Print control methods
    - GS ( K
    - GS ( K <fn=48>
    - GS ( K <fn=49>
    - GS ( K <fn=50>
    - GS ( K <fn=97>
  - Beeper tone control
    - ESC ( A
    - ESC ( A <fn=48>
    - ESC ( A <fn=97>
    - ESC ( A <fn=98>
    - ESC ( A <fn=99>
  - Graphics drawing
    - GS ( Q
    - GS ( Q <fn=48>
    - GS ( Q <fn=49>
  - Receipt enhancement control
    - FS ( E
    - FS ( E <fn=60>
    - FS ( E <fn=61>
    - FS ( E <fn=62>
    - FS ( E <fn=63>
    - FS ( E <fn=64>
    - FS ( E <fn=65>
  - Page mode control
    - GS ( P
    - GS ( P <fn=48>
- Customize Commands
  - User setup
  - Printer customization
  - NV user memory
    - FS g 1
    - FS g 2
    - Edit NV user memory
- Counter Printing Commands
  - GS C 0
  - GS C 1
  - GS C 2
  - GS C ;
  - GS c
Programming Examples
Appendixes