Select your printer model
addSetCursorPosition
Adds cursor position setting to the command buffer.
Syntax
public void addSetCursorPosition(int x, int y) throw Epos2Exception |
Parameter
x
Specifies the destination x coordinate.
Value |
Description |
---|---|
Integer from 1 to 44 |
Destination x coordinate |
y
Specifies the destination y coordinate.
Value |
Description |
---|---|
Integer from 1 to 19 |
Destination y coordinate |
Exception
When the process fails, Epos2Exception with one of the following error value occurs.
Error status |
Description |
---|---|
ERR_PARAM |
An invalid parameter was passed. |
ERR_MEMORY |
Memory necessary for processing could not be allocated. |
ERR_FAILURE |
An unknown error occurred. |
Supplementary explanation
- Use addMoveCursorPosition to move within a window.
- In DM-D70 (Standard mode), the cursor position is set in the current window specified
in addSetCurrentTextArea, with the top left as the origin.
If the window is not specified in addSetCurrentTextArea, set the cursor position in the base window, with the top left as the origin. - In DM-D70 (Column/row fixed mode), the cursor position is set in the base window, with the top left as the origin.
- The value that can be specified in the x, y parameters varies depending on the customer display used and its display modes, as well as the installation method.
x |
y |
|
---|---|---|
DM-D30 |
Integer from 1 to 20 |
Integer from 1 to 2 |
DM-D110 |
||
DM-D210 |
||
DM-D70 (Column/row fixed mode) |
||
DM-D70 (Standard mode: Landscape orientation) |
Integer from 1 to 44 |
Integer from 1 to 13 |
DM-D70 (Standard mode: Portrait orientation) |
Integer from 1 to 22 |
Integer from 1 to 19 |
Quick Access
- [Name]
- [Format]
- [Range]
- [Description]
- [Notes]
- Introduction
- help
- Printer class
- Printer
- connect
- disconnect
- startMonitor
- stopMonitor
- getStatus
- sendData
- beginTransaction
- endTransaction
- requestPrintJobStatus
- clearCommandBuffer
- addTextAlign
- addLineSpace
- addTextRotate
- addText
- addTextLang
- addTextFont
- addTextSmooth
- addTextSize
- addTextStyle
- addHPosition
- addFeedUnit
- addFeedLine
- addImage
- addLogo
- addBarcode
- addSymbol
- addHLine
- addVLineBegin
- addVLineEnd
- addPageBegin
- addPageEnd
- addPageArea
- addPageDirection
- addPagePosition
- addPageLine
- addPageRectangle
- addRotateBegin
- addRotateEnd
- addCut
- addPulse
- addSound
- addFeedPosition
- addLayout
- addCommand
- getMaintenanceCounter
- resetMaintenanceCounter
- getPrinterSetting
- setPrinterSetting
- getPrinterSettingEx
- setPrinterSettingEx
- setPrinterSettingEx[Obsolete]
- verifyPassword
- getPrinterInformation
- downloadFirmwareList
- getPrinterFirmwareInfo
- verifyUpdate
- updateFirmware
- forceRecover
- forcePulse
- forceStopSound
- forceCommand
- forceReset
- setStatusChangeEventListener
- setReceiveEventListener
- setGetPrinterSettingExListener
- setSetPrinterSettingExListener
- setVerifyPasswordListener
- interval
- LFCPrinter class
- HybridPrinter class
- HybridPrinter
- connect
- disconnect
- startMonitor
- stopMonitor
- getStatus
- sendData
- beginTransaction
- endTransaction
- clearCommandBuffer
- selectPaperType
- waitInsertion
- cancelInsertion
- ejectPaper
- readMicrData
- cleanMicrReader
- forceRecover
- forcePulse
- forceCommand
- forceReset
- paperType
- interval
- waitTime
- mode40Cpl
- setStatusChangeEventListener
- setReceiveEventListener
- LineDisplay class
- LineDisplay
- connect
- disconnect
- getStatus
- sendData
- clearCommandBuffer
- addInitialize
- addCreateWindow
- addDestroyWindow
- addSetCurrentWindow
- addClearCurrentWindow
- addCreateScreen
- addCreateScreenCustom
- addCreateTextArea
- addDestroyTextArea
- addSetCurrentTextArea
- addClearCurrentTextArea
- addSetCursorPosition
- addMoveCursorPosition
- addSetCursorType
- addText
- addReverseText
- addMarqueeText
- addSetBlink
- addSetBrightness
- addBackgroundColor
- addStartSlideShow
- addStopSlideShow
- addDownloadImage
- addRegisterDownloadImage
- addNVImage
- addClearImage
- addSymbol
- addClearSymbol
- addShowClock
- addCommand
- setReceiveEventListener
- Keyboard class
- POSKeyboard class
- BarcodeScanner class
- MSR class
- SimpleSerial class
- GermanyFiscalElement class
- OtherPeripheral class
- CommBox class
- Common to all classes
- Discovery class
- Epos2Exception class
- Log class
- EasySelect class
- EasySelectInfo class
- Appendix
- Status list
- Key code list
- List of Supported Classes
- List of Supported APIs
- Printer-specific Support Information
- TM-m10
- TM-m30
- TM-m30II
- TM-m30II-H
- TM-m30II-NT
- TM-m30II-S
- TM-m30II-SL
- TM-m30III
- TM-m30III-H
- TM-m50
- TM-m50II
- TM-m50II-H
- TM-T20
- TM-T20II
- TM-T20III
- TM-T20IIIL
- TM-T20IV-L
- TM-T20X
- TM-T20X-II
- TM-T60
- TM-T70
- TM-T70II
- TM-T81II
- TM-T81III
- TM-T82
- TM-T82II
- TM-T82III
- TM-T82IIIL
- TM-T82IV-L
- TM-T82X
- TM-T82X-II
- TM-T83II
- TM-T83III
- TM-T83IV
- TM-T88V
- TM-T88VI
- TM-T88VII
- TM-T100
- TM-L90 Liner-Free Label Printer Model
- TM-L100
- TM-U220
- TM-U330
- EU-m30
- TM-P20
- TM-P20II
- TM-P60 (Receipt)
- TM-P60 (Peeler)
- TM-P60II (Receipt)
- TM-P60II (Peeler)
- TM-P80
- TM-P80II
- TM-H6000V
- TM-T20II-i
- TM-T70-i
- TM-T82II-i
- TM-T83II-i
- TM-T88V-i
- TM-T88VI-iHUB
- TM-U220-i
- TM-T70II-DT
- TM-T70II-DT2
- TM-T88V-DT
- TM-T88VI-DT2
- TM-H6000IV-DT
- TM-T88IV
- TM-T90
- TM-L90
- TM-H6000IV