1. TOP»
  2. Epson ePOS SDK for Android »
  3. SimpleSerial class »
  4. connect

Select your printer model

Parameters are refined by the selected printer.

connect

Starts communication with the serial communication device.

Syntax

 
 
Public void connect(String target, int timeout) throws Epos2Exception

Parameter

target

Specifies the method of connecting to the printer by a character string.

Specify the connection method using the following syntax.

<connection type>:<identifier>[<device ID>]

I/F

Connection type

Identifier

Example

Wi-Fi/Ethernet
  • "TCP"
  • "TCPS"
  • IP address in IPv4 format
  • MAC address
  • Host name
 
 
 
"TCP:192.168.192.168[local_serial]"

To connect to the printer via SSL/TLS communication, specify TCPS in the connection type.

timeout

Specifies the maximum time (in milliseconds) to wait for communication with the printer to be established.

Value

Description

Integer from 1000 to 300000

Maximum wait time before an error is returned (in milliseconds).

SimpleSerial.PARAM_DEFAULT

Specifies the default value (15000).

Exception

When the process fails, Epos2Exception with one of the following error value occurs.

Error status

Description

ERR_PARAM

An invalid parameter was passed.

ERR_CONNECT

Failed to open the device.

ERR_TIMEOUT

Failed to communicate with the devices within the specified time.

ERR_ILLEGAL

Tried to start communication with a printer with which communication had been already established.

Tried to start communication with a printer during reconnection process.

ERR_MEMORY

Necessary memory could not be allocated.

ERR_FAILURE

An unknown error occurred.

ERR_PROCESSING

Could not run the process.

ERR_NOT_FOUND

The device could not be found.

ERR_IN_USE

The device was in use.

ERR_TYPE_INVALID

The device type is different.

ERR_RECOVERY_FAILURE

Failed to recover the printer.

Supplementary explanation

  • The device ID is an arbitrary character string that is set when the peripheral device is registered to the TM printer (master).
    For details, refer to the Technical Reference Guide of each printer.
  • When using multi-threading to connect to multiple printers or peripheral devices, this API and disconnect cannot be started for other printers or peripheral devices until this API finishes processing. Start the next process after this API finishes processing.
  • This API will succeed regardless of the connection status of the TM printer (master) and peripheral devices.
  • Devices other than printers are exclusively locked.
  • If Epos2Exception including ERR_RECOVERY_FAILURE occurs, restart the printer.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
Epson ePOS SDK includes patented or patent pending functions. The contents must not be disclosed to third parties.


Epson ePOS SDK for Android

  1. TOP»
  2. Epson ePOS SDK for Android »
  3. SimpleSerial class »
  4. connect

Jump to the top