Select your printer model
addCut
Adds a sheet cut command to the command buffer.
Sets how to cut paper.
Syntax
public void addCut(int type) throws Epos2Exception |
Parameter
type
Specifies how to cut paper.
Value |
Description |
---|---|
Printer.CUT_FEED |
Feed cut (cut the sheet after feeding paper). |
Printer.CUT_NO_FEED |
Cut without feed (cut the sheet without feeding paper). |
Printer.CUT_RESERVE |
Cut reservation (print the following texts and cut the sheet at the cutting position). |
Printer.FULL_CUT_FEED |
Feed full cut (cut the sheet after feeding paper) |
Printer.FULL_CUT_NO_FEED |
Full cut without feed (cut the sheet without feeding paper) |
Printer.FULL_CUT_RESERVE |
Full cut reservation (print the following texts and full cut the sheet at the cutting position) |
Printer.PARAM_DEFAULT |
Specifies the default (feed cut (cut the sheet after feeding paper)). |
Exception
When the process fails, Epos2Exception with one of the following error status occurs.
Error status |
Description |
---|---|
ERR_PARAM |
An invalid parameter was passed. |
ERR_MEMORY |
Memory necessary for processing could not be allocated. |
ERR_FAILURE |
An unknown error occurred. |
Supplementary explanation
- This API cannot be used in the page mode.
- Use this API at the "beginning of a line." If this API is used elsewhere, it will be ignored.
- If print data is not specified after the cut reservation (Printer.CUT_RESERVE), the printer will execute the cut after feeding paper up to the position of the reserved cut.
- Depending on the printer, it may wait approximately 2 seconds for the print data after the cut reservation (Printer.CUT_RESERVE) before starting the paper feed operation.
- When using the cut reservation (Printer.CUT_RESERVE), set the length of one receipt to at least 20 mm.
Quick Access
- [Name]
- [Format]
- [Range]
- [Description]
- [Notes]
- Introduction
- help
- Printer class
- Printer
- connect
- disconnect
- startMonitor
- stopMonitor
- getStatus
- sendData
- beginTransaction
- endTransaction
- requestPrintJobStatus
- clearCommandBuffer
- addTextAlign
- addLineSpace
- addTextRotate
- addText
- addTextLang
- addTextFont
- addTextSmooth
- addTextSize
- addTextStyle
- addHPosition
- addFeedUnit
- addFeedLine
- addImage
- addLogo
- addBarcode
- addSymbol
- addHLine
- addVLineBegin
- addVLineEnd
- addPageBegin
- addPageEnd
- addPageArea
- addPageDirection
- addPagePosition
- addPageLine
- addPageRectangle
- addRotateBegin
- addRotateEnd
- addCut
- addPulse
- addSound
- addFeedPosition
- addLayout
- addCommand
- getMaintenanceCounter
- resetMaintenanceCounter
- getPrinterSetting
- setPrinterSetting
- getPrinterSettingEx
- setPrinterSettingEx
- setPrinterSettingEx[Obsolete]
- verifyPassword
- getPrinterInformation
- downloadFirmwareList
- getPrinterFirmwareInfo
- verifyUpdate
- updateFirmware
- forceRecover
- forcePulse
- forceStopSound
- forceCommand
- forceReset
- setStatusChangeEventListener
- setReceiveEventListener
- setGetPrinterSettingExListener
- setSetPrinterSettingExListener
- setVerifyPasswordListener
- interval
- LFCPrinter class
- HybridPrinter class
- HybridPrinter
- connect
- disconnect
- startMonitor
- stopMonitor
- getStatus
- sendData
- beginTransaction
- endTransaction
- clearCommandBuffer
- selectPaperType
- waitInsertion
- cancelInsertion
- ejectPaper
- readMicrData
- cleanMicrReader
- forceRecover
- forcePulse
- forceCommand
- forceReset
- paperType
- interval
- waitTime
- mode40Cpl
- setStatusChangeEventListener
- setReceiveEventListener
- LineDisplay class
- LineDisplay
- connect
- disconnect
- getStatus
- sendData
- clearCommandBuffer
- addInitialize
- addCreateWindow
- addDestroyWindow
- addSetCurrentWindow
- addClearCurrentWindow
- addCreateScreen
- addCreateScreenCustom
- addCreateTextArea
- addDestroyTextArea
- addSetCurrentTextArea
- addClearCurrentTextArea
- addSetCursorPosition
- addMoveCursorPosition
- addSetCursorType
- addText
- addReverseText
- addMarqueeText
- addSetBlink
- addSetBrightness
- addBackgroundColor
- addStartSlideShow
- addStopSlideShow
- addDownloadImage
- addRegisterDownloadImage
- addNVImage
- addClearImage
- addSymbol
- addClearSymbol
- addShowClock
- addCommand
- setReceiveEventListener
- Keyboard class
- POSKeyboard class
- BarcodeScanner class
- MSR class
- SimpleSerial class
- GermanyFiscalElement class
- OtherPeripheral class
- CommBox class
- Common to all classes
- Discovery class
- Epos2Exception class
- Log class
- EasySelect class
- EasySelectInfo class
- Appendix
- Status list
- Key code list
- List of Supported Classes
- List of Supported APIs
- Printer-specific Support Information
- TM-m10
- TM-m30
- TM-m30II
- TM-m30II-H
- TM-m30II-NT
- TM-m30II-S
- TM-m30II-SL
- TM-m30III
- TM-m30III-H
- TM-m50
- TM-m50II
- TM-m50II-H
- TM-T20
- TM-T20II
- TM-T20III
- TM-T20IIIL
- TM-T20IV-L
- TM-T20X
- TM-T20X-II
- TM-T60
- TM-T70
- TM-T70II
- TM-T81II
- TM-T81III
- TM-T82
- TM-T82II
- TM-T82III
- TM-T82IIIL
- TM-T82IV-L
- TM-T82X
- TM-T82X-II
- TM-T83II
- TM-T83III
- TM-T83IV
- TM-T88V
- TM-T88VI
- TM-T88VII
- TM-T100
- TM-L90 Liner-Free Label Printer Model
- TM-L100
- TM-U220
- TM-U330
- EU-m30
- TM-P20
- TM-P20II
- TM-P60 (Receipt)
- TM-P60 (Peeler)
- TM-P60II (Receipt)
- TM-P60II (Peeler)
- TM-P80
- TM-P80II
- TM-H6000V
- TM-T20II-i
- TM-T70-i
- TM-T82II-i
- TM-T83II-i
- TM-T88V-i
- TM-T88VI-iHUB
- TM-U220-i
- TM-T70II-DT
- TM-T70II-DT2
- TM-T88V-DT
- TM-T88VI-DT2
- TM-H6000IV-DT
- TM-T88IV
- TM-T90
- TM-L90
- TM-H6000IV