Making Wi-Fi Settings by PIN Code Setup (WPS)
You can automatically connect to a wireless router by using a PIN code. You can use this method to set up if a wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the wireless router.
-
Select
on the home screen.
To select an item, use the
buttons, and then press the
OK button.
-
Select Wi-Fi (Recommended).
-
Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change Settings to change the settings.
-
Select Others > PIN Code Setup (WPS).
-
Use your computer to enter the PIN code (an eight digit number) displayed on the printer's control panel into the wireless router within two minutes.
Note:See the documentation provided with your wireless router for details on entering a PIN code.
-
Press the OK button on the printer.
-
Close the screen.
The screen automatically closes after a specific length of time.
Note:If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a connection report and check the solution.
-
Press the
button.
