Inserting Tape Cartridges

You can use tapes with widths ranging from approximately 4 mm to 24 mm.

For LW-C610: Use only tape cartridges with the mark .

For LW-C610PX: Use only tape cartridges with the mark .

Caution Make sure the power is off before you install a tape cartridge.

1. Remove any slack from the ribbon using a pencil or pen.



2. Open the tape cover.



3. Insert the cartridge as shown and press it down firmly until it snaps into place.

Make sure the end of the tape slides into the ejection slot.



4. Close the cover.