Select your printer model
verifyPassword
Compare the character string specified in this API with the administrator password set in the printer. Check to see if the specified character string and administrator password match.
This API error status is the API processing result.
The processing result of the devices using this API is notified to the callback method set by the setVerifyPasswordDelegate API of the Printer class.
Do not execute this API in continuation without checking the processing result with the callback method.
Syntax
- (int) verifyPassword:(long)timeout administratorPassword:(NSString *)administratorPassword; |
Parameter
timeout
Specifies the timeout period before completion of command transmission in milliseconds.
Value |
Description |
---|---|
Integer from 5000 to 60000 |
Timeout period (in milliseconds) |
EPOS2_PARAM_DEFAULT |
Specifies the default value (30000). |
administratorPassword
Specify the character string to compare with the administrator password set in the printer.
Specify the character string (administrator password) you wish to check.
Return value
Error status |
Description |
---|---|
EPOS2_SUCCESS |
The function was executed successfully. |
EPOS2_ERR_PARAM |
An invalid parameter was passed. |
EPOS2_ERR_ILLEGAL |
This API was called while no communication had been started. |
EPOS2_ERR_MEMORY |
Sufficient memory required for processing could not be allocated. |
EPOS2_ERR_FAILURE |
An unknown error occurred. |
EPOS2_ERR_TYPE_INVALID |
The device type is different. |
EPOS2_ERR_UNSUPPORTED |
Used in an unsupported printer. |
EPOS2_ERR_PROCESSING |
Could not run the process. |
Supplementary explanation
- This API cannot be used simultaneously with other APIs.
After executing this API, do not execute any other API until the callback is returned. - This API can be used in the system configuration of the TM printer model and customer
display model.
With the system configuration of the TM printer + DM-D + barcode scanner model, this API can be used when connecting via Bluetooth and USB. - This API cannot be used with SSL/TLS communication.
- Since it takes time to send and receive large amounts of data over BLE connection, this API cannot be used with BLE connection.
Quick Access
- [Name]
- [Format]
- [Range]
- [Description]
- [Notes]
- Introduction
- help
- Epos2Printer class
- initWithPrinterSeries
- connect
- disconnect
- startMonitor
- stopMonitor
- getStatus
- sendData
- beginTransaction
- endTransaction
- requestPrintJobStatus
- clearCommandBuffer
- addTextAlign
- addLineSpace
- addTextRotate
- addText
- addTextLang
- addTextFont
- addTextSmooth
- addTextSize
- addTextStyle
- addHPosition
- addFeedUnit
- addFeedLine
- addImage
- addLogo
- addBarcode
- addSymbol
- addHLine
- addVLineBegin
- addVLineEnd
- addPageBegin
- addPageEnd
- addPageArea
- addPageDirection
- addPagePosition
- addPageLine
- addPageRectangle
- addRotateBegin
- addRotateEnd
- addCut
- addPulse
- addSound
- addFeedPosition
- addLayout
- addCommand
- getMaintenanceCounter
- resetMaintenanceCounter
- getPrinterSetting
- setPrinterSetting
- getPrinterSettingEx
- setPrinterSettingEx
- setPrinterSettingEx[Obsolete]
- verifyPassword
- getPrinterInformation
- downloadFirmwareList
- getPrinterFirmwareInfo
- verifyUpdate
- updateFirmware
- forceRecover
- forcePulse
- forceStopSound
- forceCommand
- forceReset
- setStatusChangeEventDelegate
- setReceiveEventDelegate
- setGetPrinterSettingExDelegate
- setSetPrinterSettingExDelegate
- setVerifyPasswordDelegate
- interval
- Epos2LFCPrinter class
- Epos2HybridPrinter class
- initWithLang
- connect
- disconnect
- startMonitor
- stopMonitor
- getStatus
- sendData
- beginTransaction
- endTransaction
- clearCommandBuffer
- selectPaperType
- waitInsertion
- cancelInsertion
- ejectPaper
- readMicrData
- cleanMicrReader
- forceRecover
- forcePulse
- forceCommand
- forceReset
- paperType
- interval
- waitTime
- mode40Cpl
- setStatusChangeEventDelegate
- setReceiveEventDelegate
- Epos2LineDisplay class
- initWithDisplayModel
- connect
- disconnect
- getStatus
- sendData
- clearCommandBuffer
- addInitialize
- addCreateWindow
- addDestroyWindow
- addSetCurrentWindow
- addClearCurrentWindow
- addCreateScreen
- addCreateScreenCustom
- addCreateTextArea
- addDestroyTextArea
- addSetCurrentTextArea
- addClearCurrentTextArea
- addSetCursorPosition
- addMoveCursorPosition
- addSetCursorType
- addText
- addReverseText
- addMarqueeText
- addSetBlink
- addSetBrightness
- addBackgroundColor
- addStartSlideShow
- addStopSlideShow
- addDownloadImage
- addRegisterDownloadImage
- addNVImage
- addClearImage
- addSymbol
- addClearSymbol
- addShowClock
- addCommand
- setReceiveEventDelegate
- Epos2Keyboard class
- Epos2POSKeyboard class
- Epos2BarcodeScanner class
- Epos2MSR class
- Epos2SimpleSerial class
- Epos2GermanyFiscalElement class
- Epos2OtherPeripheral class
- Epos2CommBox class
- Common to all classes
- Epos2Discovery class
- Epos2Log class
- Epos2BluetoothConnection class
- EasySelect class
- EasySelectInfo class
- Appendix
- Status list
- Key code list
- List of Supported Classes
- List of Supported APIs
- Printer-specific Support Information
- TM-m10
- TM-m30
- TM-m30II
- TM-m30II-H
- TM-m30II-NT
- TM-m30II-S
- TM-m30II-SL
- TM-m30III
- TM-m30III-H
- TM-m50
- TM-m50II
- TM-m50II-H
- TM-T20
- TM-T20II
- TM-T20III
- TM-T20IIIL
- TM-T20X
- TM-T60
- TM-T70
- TM-T70II
- TM-T81II
- TM-T81III
- TM-T82
- TM-T82II
- TM-T82III
- TM-T82IIIL
- TM-T82X
- TM-T83III
- TM-T88V
- TM-T88VI
- TM-T88VII
- TM-T100
- TM-L90 Liner-Free Label Printer Model
- TM-L100
- TM-U220
- TM-U220II
- TM-U330
- TM-P20
- TM-P20II
- TM-P60 (Receipt)
- TM-P60 (Peeler)
- TM-P60II (Receipt)
- TM-P60II (Peeler)
- TM-P80
- TM-P80II
- TM-H6000V
- TM-T20II-i
- TM-T70-i
- TM-T82II-i
- TM-T83II-i
- TM-T88V-i
- TM-T88VI-iHUB
- TM-U220-i
- TM-U220IIB-i
- TM-T70II-DT
- TM-T70II-DT2
- TM-T88V-DT
- TM-T88VI-DT2
- TM-H6000IV-DT
- TM-T88IV
- TM-T90
- TM-L90
- TM-H6000IV
- Usage restriction by firmware version