Attaching the Plate Lock on the Tablet

By attaching the plate lock on the back of the tablet and locking the slider, the tablet is locked in all directions.

1. Remove the oil and dust from the back of the tablet.

2. Align the location of the plate lock and the holder, and then attach the plate lock to the back of the tablet.


CAUTION:

• When attaching the plate lock, attach so that the edge of the tablet and the edge of the plate lock are aligned.

  

• Be sure to leave sufficient time after bonding to allow the plate lock to be securely attached to the tablet before use.

• Once the plate lock had been attached, do not try to pull it off. After it has been attached, pulling it off may deform the plate lock and it cannot be attached again. Therefore, make sure you attach the plate lock in the correct position the first time.

• Depending on the position in which the plate lock is attached, you may not be able to use the tablet's camera function.

• Depending on the position in which the plate lock is attached, it may interfere with the tablet's buttons.

• Do not attach the plate lock to protruding sections of the tablet such as the camera.

• If the surface the plate lock is attached to is not flat, the plate lock may not be attached securely.