Before Using the Scanner
Part Names
Setup
Basic Operations
Cleaning
Troubleshooting
Product Specifications
Appendix
Top > Cleaning > Cleaning the MICR Unit
Cleaning the MICR Unit
Dirt on the MICR unit can cause frequent MICR read errors. The MICR unit should be cleaned once a week or every 2,000 scans.
Use the TM-S1000II Utility or your application software to clean the MICR unit. TM-S1000II Utility can be downloaded from the product information page.
Use the following cleaning cards manufactured by KICTeam, Inc.
-
Waffletechnology® MICR cleaning card (model: KWEPS-CS1B15WS)
-
Epson Check Scanner Cleaning Kit (model: KWEPS-KCS2)
Note-
For cleaning procedures, see the TM-S1000II Utility User‘s Manual.
-
Do not use sticky cleaning sheets. They may cause a paper jam or machine failure.
-
Be sure to dispose of used cleaning sheets.
-
We recommend cleaning the image scanner after cleaning the MICR unit.
Before Using the Scanner
Part Names
Setup
Basic Operations
Cleaning
Troubleshooting
Product Specifications
Appendix
Top > Cleaning > Cleaning the MICR Unit
Cleaning the MICR Unit
Dirt on the MICR unit can cause frequent MICR read errors. The MICR unit should be cleaned once a week or every 2,000 scans.
Use the TM-S1000II Utility or your application software to clean the MICR unit. TM-S1000II Utility can be downloaded from the product information page.
Use the following cleaning cards manufactured by KICTeam, Inc.
-
Waffletechnology® MICR cleaning card (model: KWEPS-CS1B15WS)
-
Epson Check Scanner Cleaning Kit (model: KWEPS-KCS2)
Note-
For cleaning procedures, see the TM-S1000II Utility User‘s Manual.
-
Do not use sticky cleaning sheets. They may cause a paper jam or machine failure.
-
Be sure to dispose of used cleaning sheets.
-
We recommend cleaning the image scanner after cleaning the MICR unit.