/ Scanning / Scanning from Smart Devices / Scanning by Touching Smart Devices to the NFC Tag

Scanning by Touching Smart Devices to the NFC Tag

Even if your smart device does not make any settings to use the printer, you can automatically connect it and scan by touching the NFC antenna of a smart device to the printer's NFC Tag.

Make sure that you prepare the followings to use this feature.

  • Enable the NFC function on your smart device.

  • Epson iPrint is installed on your smart device. If not, touch the NFC tag antenna of the smart device to the printer's NFC Tag to install it.

Note:

  • Android 4.0 or later supports NFC (Near Field Communication)

  • The location of the NFC antenna varies depending on the smart device. See the documentation provided with your smart device for more details.

  • The printer may not be able to communicate with the smart device when there are obstacles such as metal between the printer's NFC Tag and the NFC antenna of the smart device,

  1. Place the originals in the printer.

  2. Touch the NFC antenna of your smart device to the printer's NFC Tag.

    Epson iPrint starts.

  3. Select the scan menu in Epson iPrint.

  4. Touch the NFC antenna of your smart device to the printer's NFC Tag again.

    Scanning starts.