/ Preparing the Printer / Placing Originals / Placing Originals on the Scanner Glass

Placing Originals on the Scanner Glass

Caution:

Be careful not to trap your hand or fingers when opening or closing the document cover. Otherwise you may be injured.

Important:

When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.

  1. Open the document cover.

  2. Remove any dust or stains on the scanner glass.

  3. Place the original face-down and slide it to the corner mark.

    Note:

    • A range of 1.5 mm from the bottom edge and right edge of the scanner glass is not scanned.

    • When originals are placed in the ADF and on the scanner glass, priority is given to the originals in the ADF.

  4. Close the cover gently.

    Important:

    Do not apply too much force to the scanner glass or the document cover. Otherwise, they may be damaged.

  5. Remove the originals after scanning.

    Note:

    If you leave the originals on the scanner glass for a long time, they may stick to the surface of the glass.

Placing an ID Card for Copying