/ Network Settings / Making Wi-Fi Settings from the Printer / Making Wi-Fi Direct (Simple AP) Connection Settings

Making Wi-Fi Direct (Simple AP) Connection Settings

This method allows you to connect the printer directly to devices without a wireless router. The printer acts as a wireless router.

  1. Tap on the home screen.

  2. Select Wi-Fi Direct.

  3. Tap Start Setup.

    If you have made Wi-Fi Direct (Simple AP) settings, the detailed connection information is displayed. Go to step 5.

  4. Tap Start Setup.

  5. Check the SSID and password displayed on the printer's control panel.

    On the computer's network connection screen or the smart device's Wi-Fi screen, select the SSID shown on the printer's control panel to connect.

  6. Enter the password displayed on the printer's control panel on the computer or smart device.

    Note:

    When you enable Wi-Fi Direct, it remains enabled unless you restore the default network settings and disable Wi-Fi Direct.

  7. After the connection is established, tap OK on the printer's control panel.

  8. Close the Network Connection Settingsscreen.

Related Information