Network Service and Software Information
Application for Scanning Documents and Images (Epson Scan 2)
Application for Configuring Scanning Operations from the Control Panel (Epson Event Manager)
Application for Configuring Fax Operations and Sending Faxes (FAX Utility)
Application for Quick and Fun Printing from a Computer (Epson Photo+)
Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)
Application for Scanning and Transferring Images (Easy Photo Scan)
Application for Updating Software and Firmware (Epson Software Updater)
Application for Setting up the Device on a Network (EpsonNet Config)
Colored Banding Appears at Intervals of Approximately 3.3 cm
The Position, Size, or Margins of the Printout Are Incorrect
Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied Image
An Image of the Reverse Side of the Original Appears in the Copied Image
The Text or Image Copied from the ADF is Squeezed or Stretched
You can make a Receive Mode using Fax Setting Wizard. When making fax setting at the first time, we recommend you to use the Fax Setting Wizard. If you want to change only the Receive Mode, follow the instruction below.
Select Settings on the home screen.
Select General Settings > Fax Settings > Basic Settings > Receive Mode.
Select the Receive Mode depending on your use.
If a phone is not connected, you must select Auto.
We recommend setting Rings to Answer to as low a number as possible.
You can make a voice call if you hang up the phone within the number of rings set in Rings to Answer.
When making Remote Receive settings, you can start fax receiving faxes using only operations on the connected phone.