Select your printer model

Parameters are refined by the selected printer.

DM-D30
DM-D70
DM-D110
DM-D210

US T

[Name]

Set and display counter (time)

[Format]

ASCII		US		T		h		m
Hex		1F		54		h		m
Decimal		31		84		h		m

[Range]

h = 0 - 23

m = 0 - 59

[Default]

h = 0, m = 0

[Description]

When this command is entered, the screen is cleared and the time is displayed in 24-hour mode at the right side of the bottom line.

[Note]

h is hours, and m is minutes. The counter for the time starts at h: m: 00.
After the time is displayed, the "Cursor" moves to the "Home position".
The time display is cleared under the following conditions.
- When the "Cursor" moves to the lower row.
- When the CLR command is received
- When macro processing is over
Even if the display is cleared, the time count continues.
This command has no effect on the setting of the "Window".

Quick Access

[Name]
[Format]
[Range]
[Description]
[Notes]

ESC/POS^® includes patented or patent pending commands. The contents must not be disclosed to third parties.

ESC/POS^® Command Reference for Customer Displays

Introduction
Command List
- Commands in Code Order
Commands Arranged by Function
- Character Displaying Commands
  - CLR
  - CAN
  - ESC %
  - ESC &
  - ESC ?
  - ESC R
  - ESC t
  - US C
  - US E
  - US T
  - US U
  - US r
  - US .
  - US ,
  - US ;
  - US #
  - US ( G <fn=35>
  - US ( H
  - US ( H <fn=34>
  - US ( H <fn=35>
- Display Position Commands
  - BS
  - HT
  - LF
  - US LF
  - HOM
  - CR
  - US CR
  - US B
  - US $
  - US MD1
  - US MD2
  - US MD3
- Window Commands
- Bit Image Commands
- 2D Code
- Macro Function Commands
  - US :
  - US ^
- Kanji Commands
- Miscellaneous Commands
  - ESC =
  - ESC @
  - US X
  - US v
  - US @
  - US ( A
  - US ( B
  - US ( B <fn=48>
  - US ( M
  - US ( M <fn=1>
  - US ( M <fn=2>
  - US ( M <fn=3>
- Customize Commands
Appendixes