US ( L <Function 74>

[Name]

Define the NV graphics data (image data format)

[Format]

ASCII

(

kc1

kc2

d1...dk

Hex

kc1

kc2

d1...dk

Decimal

kc1

kc2

d1...dk

[Range]

5 ≤ (pL + pH × 256) ≤ 65535 (0 ≤ pL ≤ 255，0 ≤ pH ≤ 255)

m = 48

fn = 74

48 ≤ kc1 ≤ 57,　65 ≤ kc1 ≤ 90,　97 ≤ kc1 ≤ 122

(30h ≤ kc1 ≤ 39h,　41h ≤ kc1 ≤ 5Ah,　61h ≤ kc1 ≤ 7Ah)

48 ≤ kc2 ≤ 57,　65 ≤ kc2 ≤ 90,　97 ≤ kc2 ≤ 122

(30h ≤ kc2 ≤ 39h,　41h ≤ kc2 ≤ 5Ah,　61h ≤ kc2 ≤ 7Ah)

kc1 = 39 and kc2 = 70

(kc1 = 27h and kc2 =46h)

0 ≤ d ≤ 255

k = (pL + pH x 256) - 4

[Description]

Defines graphics data in non-volatile memory.
- One item of definition data is configured by (d1...dk).
- Defining fails if an image with a non-compatible format is specified. See “1.3 Compatible Image Specifications” for compatible images.
- If the key code specified for the NV graphics area already exists, the existing graphics data is deleted and then the new graphics data is saved.
- By specifying the key code (kc1, kc2) in combination, the images for the following purposes are defined.

ASCII	kc1	kc2	Use
00 - 50	30h ≤ kc1 ≤ 39h	30h ≤ kc2 ≤ 39h	Images for slideshow
'F	27h	46h	Images for frame
Other than the above	Other than the above	Other than the above	Images for freely selected display

ASCII

kc1

kc2

Use

00 - 50

30h ≤ kc1 ≤ 39h

30h ≤ kc2 ≤ 39h

Images for slideshow

27h

46h

Images for frame

Other than the above

Images for freely selected display

* Images for freely selected display can only be displayed by <Function 75>.
- Makes images registered for slideshows conform with the image size (pixels in vertical and horizontal directions).
- For images for frame, sets the origin at the upper left of the text area to display in the actual size as the defined image. However, the origin is set at the upper left of the display and not the upper left of the text area if column/line mode or text only (center) is specified by US ( K <Function 1> screen layout selection.
The slideshow is temporarily stopped while this function is executing. It is restarted when this function ends.
When this function is executed, the screen being displayed is cleared and the registration completed standby screen is displayed.
- During registration, optimization of the NV graphics area might be executed. If this occurs, the execution time of this function might require approximately 100 sec.

[Note]

When registering an image to an already defined key code, use <Function 65> to set all key codes to “undefined” before executing this function.

Quick Access

[Name]
[Format]
[Range]
[Description]
[Notes]

ESC/POS^® includes patented or patent pending commands. The contents must not be disclosed to third parties.

ESC/POS^® Command Reference for Customer Displays

Introduction
Command List
- Commands in Code Order
Commands Arranged by Function
- Character Displaying Commands
  - CLR
  - CAN
  - ESC %
  - ESC &
  - ESC ?
  - ESC R
  - ESC t
  - US C
  - US E
  - US T
  - US U
  - US r
  - US .
  - US ,
  - US ;
  - US #
  - US ( G <fn=35>
  - US ( H
  - US ( H <fn=34>
  - US ( H <fn=35>
- Display Position Commands
  - BS
  - HT
  - LF
  - US LF
  - HOM
  - CR
  - US CR
  - US B
  - US $
  - US MD1
  - US MD2
  - US MD3
- Window Commands
- Bit Image Commands
- 2D Code
- Macro Function Commands
  - US :
  - US ^
- Kanji Commands
- Miscellaneous Commands
  - ESC =
  - ESC @
  - US X
  - US v
  - US @
  - US ( A
  - US ( B
  - US ( B <fn=48>
  - US ( M
  - US ( M <fn=1>
  - US ( M <fn=2>
  - US ( M <fn=3>
- Customize Commands
Appendixes