Network Service and Software Information
Application for Scanning Documents and Images (Epson Scan 2)
Application for Configuring Scanning Operations from the Control Panel (Epson Event Manager)
Application for Configuring Fax Operations and Sending Faxes (FAX Utility)
Application for Quick and Fun Printing from a Computer (Epson Photo+)
Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)
Application for Updating Software and Firmware (Epson Software Updater)
Application for Setting up the Device on a Network (EpsonNet Config)
Colored Banding Appears at Intervals of Approximately 2.5 cm
The Position, Size, or Margins of the Printout Are Incorrect
Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied Image
An Image of the Reverse Side of the Original Appears in the Copied Image
The Text or Image Copied from the ADF is Squeezed or Stretched
When the copied or scanned images from the ADF are smeared or the originals do not feed in the ADF correctly, clean the ADF.
Never use alcohol or thinner to clean the printer. These chemicals can damage the printer.
Open the ADF cover.
Use a soft, moist cloth to clean the roller and the interior of the ADF.
Using a dry cloth may damage the surface of the roller. Use the ADF after the roller has dried.
Close the ADF cover, and then open the document cover.
Clean the part that is shown in the illustration.
If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid.
Do not press the glass surface too hard.
Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan quality.
If the problem cannot be cleared, turn off the printer by pressing the button, open the ADF cover, and then raise the ADF input tray.
Clean the part that is shown in the illustration.