Network Service and Software Information
Application for Scanning Documents and Images (Epson Scan 2)
Application for Configuring Scanning Operations from the Control Panel (Epson Event Manager)
Application for Configuring Fax Operations and Sending Faxes (FAX Utility)
Application for Quick and Fun Printing from a Computer (Epson Photo+)
Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)
Application for Updating Software and Firmware (Epson Software Updater)
Application for Setting up the Device on a Network (EpsonNet Config)
Colored Banding Appears at Intervals of Approximately 2.5 cm
The Position, Size, or Margins of the Printout Are Incorrect
Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied Image
An Image of the Reverse Side of the Original Appears in the Copied Image
The Text or Image Copied from the ADF is Squeezed or Stretched
On the Image Format Options window in Epson Scan 2, check that Text Language is set correctly on the Text tab.
Check that the original is placed straight.
Use an original with clear text. Text recognition may decline for the following types of originals.
Originals that have been copied a number of times
Originals received by fax (at low resolutions)
Originals on which the letter spacing or line spacing is too small
Originals with ruled lines or underlining over the text
Originals with hand-written text
Originals with creases or wrinkles
In Document Mode in Epson Scan 2, when Image Type on the Main Settings tab is set to Black & White, adjust Threshold on the Advanced Settings tab. When you increase the Threshold, black becomes stronger.
In Document Mode in Epson Scan 2, select the Advanced Settings tab, and then Image Option > Text Enhancement.