Network Service and Software Information
Application for Scanning Documents and Images (Epson Scan 2)
Application for Configuring Scanning Operations from the Control Panel (Epson Event Manager)
Application for Configuring Fax Operations and Sending Faxes (FAX Utility)
Application for Quick and Fun Printing from a Computer (Epson Photo+)
Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)
Application for Updating Software and Firmware (Epson Software Updater)
Application for Setting up the Device on a Network (EpsonNet Config)
Colored Banding Appears at Intervals of Approximately 2.5 cm
The Position, Size, or Margins of the Printout Are Incorrect
Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied Image
An Image of the Reverse Side of the Original Appears in the Copied Image
The Text or Image Copied from the ADF is Squeezed or Stretched
When black ink is running low and there is enough color ink remaining, you can use a mixture of color inks to create black. You can continue printing while preparing a replacement black ink cartridge.
This feature is only available when you select the following settings in the printer driver.
Paper Type: plain papers
Quality: Standard
EPSON Status Monitor 3: Enabled
If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and then select Enable EPSON Status Monitor 3.
Composite black looks slightly different from pure black. In addition, the print speed is reduced.
To maintain the quality of the print head, black ink is also consumed.
Options |
Description |
---|---|
Yes |
Select to use a mixture of color inks to create black. This window is displayed the next time you print a similar job. |
No |
Select to continue using the remaining black ink. This window is displayed the next time you print a similar job. |
Disable this feature |
Select to continue using the remaining black ink. This window is not displayed until you replace the black ink cartridge and it runs low again. |