/ Network Settings / Making Wi-Fi Settings from the Printer / Making Wi-Fi Settings by PIN Code Setup (WPS)

Making Wi-Fi Settings by PIN Code Setup (WPS)

You can automatically connect to an wireless router by using a PIN code. You can use this method to set up if an wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the wireless router.

  1. Select Wi-Fi Setup on the home screen.

    To select an item, use the buttons, and then press the OK button.

  2. Select Wi-Fi (Recommended).

  3. Press the OK button to proceed.

  4. Select Others.

  5. Select PIN Code (WPS).

  6. Use your computer to enter the PIN code (an eight digit number) displayed on the printer's control panel into the wireless router within two minutes.

    Note:

    See the documentation provided with your wireless router for details on entering a PIN code.

  7. Press the OK button on the printer.

    Setup is complete when the setup completion message is displayed.

    Note:

    If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a connection report and check the solution.