/ Preparing the Printer / Placing Originals / Placing Originals on the ADF

Placing Originals on the ADF

  1. Align the edges of the originals.

  2. Open the ADF input tray.

  3. Slide out the ADF edge guide.

  4. Place the originals face-up and short edge first in the ADF, and then slide the ADF edge guide to the edge of the originals.

    Important:

    • Do not load originals above the line indicated by the triangle symbol on the ADF.

    • Do not add originals while scanning.

Placing Originals on the ADF for 2-up Copying