Detecting the Original Size Automatically

When you select Auto Detect as the paper setting, the following types of paper size are identified automatically.

Note:

The sizes for the following originals may not be detected correctly. If the sizes are not detected, set the size manually on the control panel.

Originals that are torn, folded, wrinkled, or curled (if the originals are curled, flatten the curl before placing the originals.)
Originals with a lot of binder holes
OHPs, translucent originals, or glossy originals

Placing originals on the ADF

Priority Setting ^*1	Placing Upright ^*2	Placing Sideways ^*3
Metric Size Priority	A5, B5, A4	Legal, B5, A4, B4, A3
Inch Size Priority	A5, Executive, Letter	Legal, Executive, Letter, B4, US B (11×17 in.)
K Size Priority	A5, 16K (195×270 mm)	Legal, 16K (195×270 mm), A4, 8K (270×390 mm)

*1:This is the item selected on the setting screen after initial filling.

*2:Place the long edge of the original toward the paper feed entrance of the ADF.

*3:Place the short edge of the original toward the paper feed entrance of the ADF.

Placing originals on the scanner glass

Priority Setting ^*1	Placing Upright ^*2	Placing Sideways ^*3
Metric Size Priority	B5, A4	A5, B5, A4, B4, A3
Inch Size Priority	Executive, Letter	Half letter, Executive, Letter, Legal, US B (11×17 in.)
K Size Priority	B5, 16K (195×270 mm), A4	A5, B5, 16K (195×270 mm), A4, B4, 8K (270×390 mm), A3

*1:This is the item selected on the setting screen after initial filling.

*2:Place the long edge of the original toward the left side of the scanner glass.

*3:Place the short edge of the original toward the left side of the scanner glass.

AM-C6000 Series/AM-C5000 Series/AM-C4000 Series