> Scanning > Scanning Using Presets Settings

Scanning Using Presets Settings

You can load the pre-configured Presets settings you want to use to scan.

  1. Use one of the following methods to load the Presets.

    • Select Presets on the home screen of the scanner’s control panel, and then select the setting from the list.
    • Select on the scanning menu, select Load Presets, and then select the setting from the list.
    • If you have added the Presets icon to the home screen, select the icon on the home screen.
    Note:

    If you have enabled Quick Send in the preset settings, on the preset setting, scanning starts immediately.

  2. If the loading confirmation screen is displayed, select Close to close the screen.

  3. Check the loaded Presets settings.

  4. Tap .