1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Miscellaneous Commands »
  5. DLE DC4   (fn=2)

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

DLE DC4   (fn=2)

[Name]

Execute power-off sequence

[Format]

ASCII
   
DLE
  
DC4
  
fn
  
a
  
b
Hex
10
14
02
01
08
Decimal
16
20
2
1
8

[Range]

fn = 2
a = 1
b = 8

[Description]

Executes the printer power-off sequence and transmits the power-off notice.
  • Saving the maintenance counter values
  • Busy controlling for interface
  • Changing to waiting state of mechanism
Executes power off processing (this processing depends on printer model).

[Notes]

  • This is a Real-time command. Refer to Notes of Real-time Commands for usage note.
  • This command can be used after enabling real time command processing with GS ( D.
  • All information and data stored in RAM will be deleted by processing this command.
  • When the printer has executed setup of power off processing, the printer transmits the power-off notice as shown below to the host.
  • Power-off notice
    Hex
    Decimal
    Number of bytes
    Header
    3Bh
    59
    1 byte
    Identifier
    30h
    48
    1 byte
    NUL
    00h
    0
    1 byte
  • Maintenance counter values are maintained by executing this command; therefore the maintenance counter values will be more accurate if the user uses this command before turning off the power switch.
  • The power-off notice can be differentiated from other transmission data according to specific data of the transmission data block. When the header transmitted from the printer is [hex = 3Bh / decimal = 59], treat NUL [hex = 00h / decimal = 0] as a data group and identify it according to the combination of the header and the identifier.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Miscellaneous Commands »
  5. DLE DC4   (fn=2)

Jump to the top