1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. User setup »
  6. GS ( E   <Function 10>

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20X
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82X
  • TM-T83III
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS ( E   <Function 10>

[Name]

Delete the data for the character code page

[Format]

ASCII
   
GS
  
(
  
E
  
pL
  
pH
  
fn
  
c1
  
c2
Hex
1D
28
45
03
00
0A
c1
c2
Decimal
29
40
69
3
0
10
c1
c2

[Range]

(pL + pH × 256) = 3
fn = 10
y = 2
128 ≤ c1 ≤ d2 ≤ 255

[Description]

Deletes the character pattern for the character code page in the work area.
  • c1 specifies the beginning character code for the deletion, and c2 specifies the final code.

[Notes]

  • This function works in user setting mode.
  • Characters in Hexadecimal: 80h – FFh / Decimal: 128 – 255 in ASCII code can be defined.
  • After deleting the character pattern, the dots are blank.
  • Deletes the data of the user-defined code page that is copied into the work area by GS ( E   <Function 7> .
  • If data in the user-defined code pages is not copied into the work area, this function is not available. In this case, execute GS ( E   <Function 7> first.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. User setup »
  6. GS ( E   <Function 10>

Jump to the top