This statement covers the terms of use for all users of this site ("Site"). This Site is owned and operated by Seiko Epson Corporation ("SEC"). If you do not agree to the terms and provisions of this Legal Notice, you should not use this Site.

Ownership of Site

The Site and any materials (“Materials”) posted in the Site is owned by SEC and is copyrighted. You may use the Materials in accordance with an applicable license agreement. You should review and agree to such license agreement before using the Materials. You agree to use the Materials only with the corresponding Epson brand products.

Trademark Information.

EPSON and, the EPSON logo, are registered trademarks of SEC, registered in Japan, the U.S. and other countries. SEC and its affiliates own many other registered trademarks and trade names (the "Trademarks"). Any questions concerning Trademarks should be referred to SEC through the webmaster.

Nothing contained on this Site should be construed as granting, by implication, estoppel or otherwise, any license or right to use any Trademarks displayed on this Site without the written consent of SEC or such party that may own the Trademarks. The absence of a product or service name or logo anywhere in the text of this Site does not constitute a waiver of any trademark or other intellectual property rights concerning that name or logo.

Feedback and Information.

Any feedback you provide at this Site, by electronic mail or otherwise, including data, questions, comments, suggestions or the like shall be deemed to be non-confidential and non-proprietary. SEC and its affiliates shall be free to use such information for any purpose on an unrestricted basis.

Disclaimer.

THE SITE AND ITS SERVICES ARE PROVIDED "AS IS" AND WITHOUT WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED. TO THE FULLEST EXTENT PERMISSIBLE BY APPLICABLE LAW, SEC DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. SEC does not warrant the accuracy and completeness of the services provided at this Site. SEC also does not warrant that any functions of this Site will be uninterrupted or error-free, that defects will be corrected, or that this Site or the server that makes it available is free from viruses or other harmful components. Some jurisdictions may not allow the exclusion of an implied warranty so some of the above exclusions may not apply to you in all circumstances.

Limitation of Liability.

IN NO EVENT WILL SEC OR ITS AFFILIATES ASSUME ANY RESPONSIBILITY FOR ANY DAMAGES THAT RESULT FROM YOUR ACCESS TO, USE OF, OR INABILITY TO USE, THIS SITE, EVEN IF SEC OR ITS AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THE SITE IS AT YOUR RISK. NEITHER SEC NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY DIRECT, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR PUNITIVE DAMAGES ARISING OUT OR YOUR ACCESS TO, OR USE OF, THE SITE. Some jurisdictions may not allow a limitation or exclusion on damages, so the above may not apply in all circumstances. In no event shall SEC's total liability to you for all damages, losses, and causes of action (whether in contract, tort (including but not limited to negligence) or otherwise) exceed the amount paid by you, if any, for accessing this Site.

Jurisdictional Issues.

Unless otherwise specified, the materials in this Site are presented solely for the purpose of promoting products and providing support to customers outside of Japan. This Site is controlled and operated by SEC from its offices within Japan. SEC makes no representation that materials in this Site are appropriate or available for use in all locations. Those who choose to access this Site from any location do so on their own initiative and are responsible for compliance with local laws, including without limitations any applicable export laws and regulations.

Links to This Site

If you would like to establish a link to SEC's Web site, please read and abide by the provisions in "Notice Regarding Links to This Site." For your convenience, this Site provides links to the SEC Web sites in other countries, as well as to other non-affiliated Web sites. SEC is not responsible for information posted on any Web site that you have linked to from this Site. You have the sole responsibility when visiting other Web sites linked from SEC's Web sites.

Notice Regarding Links to This Site:

You may establish links to objects posted on this Site, but you may not copy them. You may not place a browser or border environment around objects posted on this Site. Under no circumstances will SEC bear any responsibility or liability whatsoever in the event of problems arising in links due to the movement, deletion, or other modification of the directory page. No notice will be given regarding the deletion or modification of pages or the movement or change of directories.

The presence of a link does not imply recommendation of the site or any of its products by SEC.

Miscellaneous.

The terms herein shall be governed by and construed in accordance with the laws of Japan, exclusive of its choice of law rules. In the event that any of the provisions herein are held by a court or other tribunal of competent jurisdiction to be unenforceable, such provision shall be limited or eliminated to the minimum extent necessary so that these terms shall otherwise remain in full force and effect. Product descriptions and illustrations in this Site are subject to change without notice.

For information about the use of any identifying information provided to SEC when you use this Site, please review our Privacy Policy.

Update of Terms and Conditions Herein.

SEC may from time to time revise these Terms and Conditions by updating this posting. Please visit this page periodically to review the current Terms and Conditions because they are binding on you. Your continued use of this Site will mean you accept any changes.

Language

These Terms of Use of any other language than English is only for convenience purpose only and shall not be of any legal force or effect. These Terms of Use has been agreed in English, and if there are any discrepancies, contradictions or inconsistencies between the English language and any other language translation, the interpretation under English language provided for herein shall govern and prevail.

Select your printer model [−]

Parameters are refined by the selected printer.

EU-m30
TM-J2000
TM-J2100
TM-L90
TM-L90 LFC
TM-L100
TM-m10
TM-m30
TM-m30II
TM-m30II-H
TM-m30III
TM-m30III-H
TM-m30II-NT
TM-m30II-S
TM-m30II-SL
TM-m50
TM-m50II
TM-m50II-H
TM-P20
TM-P20II
TM-P60
TM-P60II
TM-P80
TM-P80II
TM-T20
TM-T20II
TM-T20III
TM-T20IIIL
TM-T20IV
TM-T20IV-L
TM-T20IV-SP
TM-T20X
TM-T20X-II
TM-T70
TM-T70II
TM-T81III
TM-T82II
TM-T82III
TM-T82IIIL
TM-T82IV
TM-T82IV-L
TM-T82X
TM-T82X-II
TM-T83III
TM-T83IV
TM-T88IV
TM-T88V
TM-T88VI
TM-T88VII
TM-T90
TM-T100
TM-U220
TM-U220II
TM-U230

FS ( L <Function 65>

[Name]

Feed paper to the label peeling position

[Format]

ASCII	FS	(	L	pL	pH	fn	m
Hex	1C	28	4C	02	00	41	m
Decimal	28	40	76	2	0	65	m

[Range]

(pL + pH × 256) = 2

fn = 65

m: different depending on the printers

[Default]

None

[Description]

Feeds paper to the label peeling position.

m	Function
48	Feeds paper to the label peeling position. However, if the paper is in standby at the label peeling position, the printer does not feed.
49	Feeds paper to the label peeling position. However, if the paper is in standby at the label peeling position, the printer feeds paper to the next label peeling position.

Function

Feeds paper to the label peeling position.

However, if the paper is in standby at the label peeling position, the printer does not feed.

Feeds paper to the label peeling position.

However, if the paper is in standby at the label peeling position, the printer feeds paper to the next label peeling position.

[Notes]

In Standard mode, please use this function at the Beginning of the line.
This function is used only with label paper.
The paper feed operation ends when no paper is detected in the paper feed to the label peeling position.
[Position information A] transmitted by FS ( L <Function 48> becomes (bit 0 = 1) when this function is processed. Moreover, the print area of the label paper or black mark paper if there is a print start position right under the label peeling position becomes "current label."
"Label peeling position" is the position where the label can be peeled off by hand. Details are different depending on the model.
Models with the peeling function will be in the label removal waiting status when Function 65 is executed. This status continues during label removal and printer reset or label removal and power off.
The label removal waiting status can be checked by DLE EOT (n = 8, a = 3: Peeler status).

, TM-L90:

The following operation is executed according to a set value of the paper layout.

Set value of paper layout	Operation
24 mm {0.94 inch} ≤ Paper layout (sb - se) < 29 mm {1.1 inches}	Execute the paper feed by the amount which corresponds to paper layout (sb - se).
Other than above	Execute the paper feed 29 mm long.

Set value of paper layout

Operation

24 mm {0.94 inch} ≤ Paper layout (sb - se) < 29 mm {1.1 inches}

Execute the paper feed by the amount which corresponds to paper layout (sb - se).

Other than above

Execute the paper feed 29 mm long.

∗ Set the paper layout (sb, se) by GS ( E <Function 49> .

[Peeler models]

When the Label peeler issuing mode is selected, the status changes to label removal standby when this function is executed. You can check the label removal standby status with DLE EOT (n = 8, a = 3: Peeler status) or the basic ASB status.

When the label removal is checked by pressing the paper feed button, the printer is in the waiting status for the paper feed button to be pressed. The waiting status for the paper feed button to be pressed can be checked by the basic ASB status or DLE EOT (n = 1: Printer status) "Online recovery waiting status."

Quick Access

[Name]
[Format]
[Range]
[Default]
[Description]
[Notes]

ESC/POS^® includes patented or patent pending commands. The contents must not be disclosed to third parties.

ESC/POS^® Command Reference for TM Printers

Introduction
Command Lists
- Commands in Code Order
- Applicable printers
- Command List by Model
  - EU-m30
  - TM-J2000, TM-J2100
  - TM-L90
  - TM-L90 LFC
  - TM-L100
  - TM-m10
  - TM-m30
  - TM-m30II
  - TM-m30II-H
  - TM-m30II-NT
  - TM-m30II-S
  - TM-m30II-SL
  - TM-m30III
  - TM-m30III-H
  - TM-m50
  - TM-m50II
  - TM-m50II-H
  - TM-P20
  - TM-P20II
  - TM-P60
  - TM-P60II
  - TM-P80
  - TM-P80II
  - TM-T100
  - TM-T20
  - TM-T20II
  - TM-T20III
  - TM-T20IIIL
  - TM-T20IV
  - TM-T20IV-L
  - TM-T20IV-SP
  - TM-T20X
  - TM-T20X-II
  - TM-T70
  - TM-T70II
  - TM-T81III
  - TM-T82II
  - TM-T82III
  - TM-T82IIIL
  - TM-T82IV
  - TM-T82IV-L
  - TM-T82X
  - TM-T82X-II
  - TM-T83III
  - TM-T83IV
  - TM-T88IV
  - TM-T88V
  - TM-T88VI
  - TM-T88VII
  - TM-T90
  - TM-U220
  - TM-U220II
  - TM-U230
- Obsolete Commands
Commands Arranged by Function
- Print Commands
  - LF
  - FF (in Page mode)
  - FF (in Standard mode)
  - CR
  - ESC FF
  - ESC J
  - ESC K
  - ESC d
  - ESC e
- Line Spacing Commands
  - ESC 2
  - ESC 3
- Character Commands
  - CAN
  - ESC SP
  - ESC !
  - ESC -
  - ESC E
  - ESC G
  - ESC M
  - ESC R
  - ESC V
  - ESC r
  - ESC t
  - ESC {
  - GS !
  - GS B
  - GS b
  - - Character effects
    - User-defined characters
      - ESC %
      - ESC &
      - ESC ?
    - Code conversion method
- Printing Paper Commands
  - Label and black mark control
- Print Position Commands
  - HT
  - ESC $
  - ESC D
  - ESC T
  - ESC W
  - ESC \
  - ESC a
  - GS $
  - GS L
  - GS T
  - GS W
  - GS \
- Paper Sensor Commands
  - ESC c 3
  - ESC c 4
- Mechanism Control Commands
  - ESC <
  - ESC U
  - ESC i
  - ESC m
  - ESC i
  - GS ( V <fn=48>
  - GS ( V <fn=49>
  - GS ( V <fn=51>
  - GS V
- Bit Image Commands
  - Bit Image
    - ESC *
    - FS p
    - FS q
    - GS *
    - GS /
    - GS Q 0
    - GS v 0
  - GS ( L / GS 8 L
  - GS D
  - Graphics
  - NV Graphics
  - Download Graphics
- Panel Button Commands
  - ESC c 5
- Status Commands
  - DLE EOT
  - ESC u
  - ESC v
  - FS ( e
  - GS a
  - GS j
  - GS r
- Barcode Commands
  - GS H
  - GS f
  - GS h
  - GS k
  - GS w
- Two-dimensional Code Commands
  - GS ( k
  - - PDF417
    - QR Code
    - MaxiCode
    - 2-dimensional GS1 DataBar
    - Composite Symbology
    - Aztec Code
    - DataMatrix
- Macro Function Commands
  - GS :
  - GS ^
- Kanji Commands
  - FS !
  - FS &
  - FS -
  - FS .
  - FS 2
  - FS ?
  - FS C
  - FS S
  - FS W
  - Kanji character effects
    - FS ( A
    - FS ( A <fn=48>
- Miscellaneous Commands
  - DLE ENQ
  - DLE DC4 <fn=1>
  - DLE DC4 <fn=2>
  - DLE DC4 <fn=3>
  - DLE DC4 <fn=7>
  - DLE DC4 <fn=8>
  - ESC ( Y
  - ESC =
  - ESC @
  - ESC L
  - ESC S
  - ESC p
  - GS ( A
  - GS ( D
  - GS I
  - GS P
  - GS g 0
  - GS g 2
  - GS z 0
  - Response or status transmission
    - GS ( H
    - GS ( H <fn=48>
    - GS ( H <fn=49>
  - Print control methods
    - GS ( K
    - GS ( K <fn=48>
    - GS ( K <fn=49>
    - GS ( K <fn=50>
    - GS ( K <fn=97>
  - Beeper tone control
    - ESC ( A
    - ESC ( A <fn=48>
    - ESC ( A <fn=97>
    - ESC ( A <fn=98>
    - ESC ( A <fn=99>
  - Graphics drawing
    - GS ( Q
    - GS ( Q <fn=48>
    - GS ( Q <fn=49>
  - Receipt enhancement control
    - FS ( E
    - FS ( E <fn=60>
    - FS ( E <fn=61>
    - FS ( E <fn=62>
    - FS ( E <fn=63>
    - FS ( E <fn=64>
    - FS ( E <fn=65>
  - Page mode control
    - GS ( P
    - GS ( P <fn=48>
- Customize Commands
  - User setup
  - Printer customization
  - NV user memory
    - FS g 1
    - FS g 2
    - Edit NV user memory
- Counter Printing Commands
  - GS C 0
  - GS C 1
  - GS C 2
  - GS C ;
  - GS c
Programming Examples
Appendixes

Select your printer model [−]

FS ( L <Function 65>

[Name]

[Format]

[Range]

, TM-L90:

, TM-P60, TM-P60II:

[Default]

[Description]

[Notes]

, TM-L90:

, TM-P60, TM-P60II:

Quick Access

In order to use the contents of TECH.REFERENCE, please agree to the following Terms of Use.

SEIKO EPSON CORPORATION ON-LINE TERMS OF USE

Select your printer model [−]

FS ( L <Function 65>

[Name]

[Format]

[Range]

, TM-L90:

, TM-P60, TM-P60II:

[Default]

[Description]

[Notes]

, TM-L90:

, TM-P60, TM-P60II:

Quick Access