FS ( E   <Function 65>

Top/bottom logo printing specified by a is as follows:

a	Function
48	Specifies top logo printing.
49	Specifies bottom logo printing.

Enabling/disabling setting specified by n is as follows:

n	Function
48	Enabled
49	Disabled

Volatile memory (RAM) is used as the storage area for set values (n).

This command is used when changing the setting of "Logo printing enabled" set with FS ( E   <Function 64> to disabled temporarily.

This function is ignored in the following cases:

• If m is outside its range.
• If it is not in the beginning of the line when the Standard mode is selected.
• When Page modeor double density Page mode is selected.

During macro definition, if 6 bytes of FS ( E pL pH fn (fn = 65: all values are normal) are processed, cancels the macro definition and starts processing this function. In this case, the macro is undefined. (If not during macro definition, the content of macro definition is not changed.)

Settings of this function is valid until execution of this function, reset, or power-off is executed (this function is not initialized by executing the ESC @ command.)

If printing is stopped by this function, regardless of settings of FS ( E   <Function 62> , FS ( E   <Function 63> , and FS ( E   <Function 64> , the function of top logo/bottom logo printing is stopped temporarily and printing is not executed.