1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Bit Image Commands »
  5. NV Graphics »
  6. GS ( L   <Function 69>

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20X
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82X
  • TM-T83III
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS ( L   <Function 69>

[Name]

Print the specified NV graphics data

[Format]

ASCII
   
GS
  
(
  
L
  
pL
  
pH
  
m
  
fn
  
kc1
  
kc2
  
x
  
y
Hex
1D
28
4C
06
00
30
45
kc1
kc2
x
y
Decimal
29
40
76
6
0
48
69
kc1
kc2
x
y

[Range]

(pL + pH × 256) = 6
m = 48
fn = 69
kc1 = 32 – 126
kc2 = 32 – 126
x, y: different depending on the printers

[Description]

Prints the NV graphics data defined by the key codes (kc1 and kc2).
  • Users have the option of specifying horizontal (times x ) × vertical (times y) size settings for the selected data.

[Notes]

  • This function is used to print NV graphics data defined using GS ( L   /   GS 8 L   <Function 67> and GS ( L   /   GS 8 L   <Function 68> of this command.
  • The printer only prints when NV graphics data corresponding to the specified key code is present.
  • Use this function when the printer enters the "beginning of the line" or "no data in print buffer" state during Standard mode.
  • Note that during page mode, printing operations will not be performed simply because image data has been stored to the print buffer.
  • NV graphics data that exceeds the print area for one line will not be printed.
  • The scales for width and height of graphics are specified by (x, y). Therefore, in Page mode with 90° or 270° clockwise-rotated graphics, the printer applies print area and dot density from [x: direction of paper feed, y: perpendicular to direction of paper feed].
  • Settings for text effect (bold, underline, orientation, etc. except for upside-down) and font size do not affect the printing of the NV graphics data.
  • Feeds the paper the required distance when printing graphics data, regardless of line feed pitch settings entered using the Set line feed command.
  • After printing the graphics, the print postion is moved to left side of the printable area. Also, the printer is in the status "Beginning of the line".
  • When printing NV graphic files, use ESC U to specify unidirectional print for vertical alignment of printed text.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Bit Image Commands »
  5. NV Graphics »
  6. GS ( L   <Function 69>

Jump to the top