1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Counter Printing Commands »
  5. GS C 0   [obsolete command]

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS C 0   [obsolete command]

[Name]

Select counter print mode

[Format]

ASCII
   
GS
  
C
  
0
  
n
  
m
Hex
1D
43
30
n
m
Decimal
29
67
48
n
m

[Range]

n = 0 – 5
m = 0 – 2, 48 – 50

[Default]

n = 0, m = 0

[Description]

Selects the print format for the serial number counter value (the number of printed digits and the print position within the entire range of printed digits).
  • n specifies the number of digits to be printed.
  • n
    Function
    0
    Prints the actual digits indicated by the number value.
    1-5
    Prints the last n digits of the serial number.
  • m specifies the layout within the specified range of printed digits, as follows:
  • m
    Justification
    Layout within digits less than those specified
    0, 48
    Align right
    Adds spaces to the left if the digits are less than those specified.
    1, 49
    Align right
    Adds 0 to the left if the digits are less than those specified.
    2, 50
    Align left
    Adds spaces to the right if the digits are less than those specified.

[Recommended Functions]

This command is supported by some printer models and will not be supported by future models.
ESC/POS does not have a substitute command.

[Notes]

  • The serial number counter is stored in the print buffer by GS c   [obsolete command] .
  • Settings of this command are effective until ESC @ is executed, the printer is reset, or the power is turned off.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Counter Printing Commands »
  5. GS C 0   [obsolete command]

Jump to the top