FS p   [obsolete command]

Multiple logo data and mark data can be specified (except for some models).

Data can be controlled by key code.

Redefining or deleting the same data is possible for each key code.

Color can be specified for the definition data.

Data can be defined by raster format.

The remaining capacity of the definition area can be confirmed.

This command is not effective when the NV bit image specified by n has not been defined.

In Standard mode, this command is effective only when there is no data in the print buffer and the printer is at the beginning of the line.

in Page mode, the NV bit image is only stored in the print buffer and is not printed.

If the NV bit image exceeds one line of print area, the printer does not print it.

The scales for width and height of NV bit images are specified by m. Therefore, in Page mode with 90° or 270° clockwise-rotated NV bit image, the printer applies print area and dot density from [width: direction of paper feed, height: perpendicular to direction of paper feed].

This command is not affected by print modes (such as emphasized, underline, character size, or 90° rotated characters), except upside-down print mode.

This command executes paper feed for amount needed for printing the NV bit image regardless of paper feed amount set by a paper feed setting command.

After printing the NV bit image, the print postion is moved to left side of the printable area.

When printing the NV bit image, selecting unidirectional print mode with ESC U enables printing patterns in which the top and bottom parts are aligned vertically.

The NV bit image is defined by FS q   [obsolete command] .

NV bit image is printed in the default dot density (dot density of vertical and horizontal direction in normal mode) defined by GS ( L   <Function 49> .