Select your printer model [−]
Parameters are refined by the selected printer.
- EU-m30
- TM-J2000
- TM-J2100
- TM-L90
- TM-L90 LFC
- TM-L100
- TM-m10
- TM-m30
- TM-m30II
- TM-m30II-H
- TM-m30III
- TM-m30III-H
- TM-m30II-NT
- TM-m30II-S
- TM-m30II-SL
- TM-m50
- TM-m50II
- TM-m50II-H
- TM-P20
- TM-P20II
- TM-P60
- TM-P60II
- TM-P80
- TM-P80II
- TM-T20
- TM-T20II
- TM-T20III
- TM-T20IIIL
- TM-T20IV
- TM-T20IV-L
- TM-T20IV-SP
- TM-T20X
- TM-T20X-II
- TM-T70
- TM-T70II
- TM-T81III
- TM-T82II
- TM-T82III
- TM-T82IIIL
- TM-T82IV
- TM-T82IV-L
- TM-T82X
- TM-T82X-II
- TM-T83III
- TM-T83IV
- TM-T88IV
- TM-T88V
- TM-T88VI
- TM-T88VII
- TM-T90
- TM-T100
- TM-U220
- TM-U220II
- TM-U230
ESC c 5
[Name]
Enable/disable panel buttons
[Format]
ASCII
|
|
ESC
|
|
c
|
|
5
|
|
n
|
Hex
|
1B
|
63
|
35
|
n
|
||||
Decimal
|
27
|
99
|
53
|
n
|
[Range]
n = 0 – 255
[Default]
n = 0
[Description]
Enables or disables the panel buttons.
-
When the LSB of n is 0, all buttons are enabled.
-
When the LSB of n is 1, all buttons are disabled.
[Notes]
-
If panel buttons are enabled, the function of the panel button, such as feeding, will be executed when the panel button is turned on.
-
If panel buttons are disabled, the function of the panel button will not be executed even if pressed the button. To prevent problems caused by accidentally pressing the buttons, use this command to disable the buttons.
-
Setting of this command is effective until ESC @ is executed, the printer is reset, or the power is turned off.
-
When the printer cover is open, there are buttons that are always enabled or disabled regardless of this command. The buttons are different, depending on the printer model.
-
Even if the panel buttons are disabled by this command, paper feed button will be enabled temporarily while printer is waiting for the buttons to be pressed. The following are some examples of the case.
-
-
When a new roll of paper is installed in the TM-U230
-
When waiting for an online recovery for the TM-L90 with Peeler
-
When the printer is waiting for the button to be pressed while GS ^ is executed
-
Quick Access
- [Name]
- [Format]
- [Range]
- [Default]
- [Description]
- [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed
to third parties.
- Introduction
- Commands Arranged by Function
- Panel Button Commands