1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Miscellaneous Commands »
  5. ESC =

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

ESC =

[Name]

Select peripheral device

[Format]

ASCII
   
ESC
  
=
  
n
Hex
1B
3D
n
Decimal
27
61
n

[Range]

n: different depending on the printers

[Default]

different depending on the printers

[Description]

[Notes]

  • When the printer is disabled, it ignores all received data and commands with the exception of ESC = and Real-time commands.
  • If ASB is enabled when the printer is disabled by this command, the printer transmits the ASB status message whenever the status changes. See the description of GS a for ASB function.
  • Settings of this command are effective until ESC @ is executed, the printer is reset, or the power is turned off.
  • The default value when the power supply is turned on and when ESC @ is executed might be different.
    • The default value when the power supply is turned on becomes the [default value].
    • The selection of peripherals after ESC @ is executed is shown in the next table.
    • n
      Setting when power supply is turned on
      switch for [Connection of DM-D] is OFF
      1
      switch for [Connection of DM-D] is ON
      2
      Setting immediately before execution of ESC @ (∗1)
      1
      2
      3
      Setting after ESC @ is executed
      switch for [Connection of DM-D] is OFF
      1
      2
      1
      switch for [Connection of DM-D] is ON
      1
      2
      2
      • (∗1) When the setting of ESC = is (n = 2), n is not changed because ESC @ is not executed.
      • For a parallel interface model and a model without the [Connection of DM-D] switch, the cases that the switch is OFF in the above table are applicable.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Miscellaneous Commands »
  5. ESC =

Jump to the top