1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Printing Paper Commands »
  5. Label and black mark control »
  6. FS ( L   <Function 80>

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

FS ( L   <Function 80>

[Name]

Paper layout error special margin setting

[Format]

ASCII
   
FS
  
(
  
L
  
pL
  
pH
  
fn
  
sn
Hex
1C
28
4C
02
00
43
sn
Decimal
28
40
76
2
0
80
sn

[Range]

(pL + pH × 256) = 2, 3
fn = 80
sn: different depending on the printers

[Default]

sn = "0"

[Description]

Sets the paper layout error special margin.
  • Sets the special margin for the vertical layout (sa) of FS ( L   <Function 33> to [± (sn × 0.1 mm)]. The setting unit is 0.1 mm.

[Notes]

  • The setting values of (sn) expressed as decimals are converted to text data and the high-order values are specified first.
  • Example: When specifying 10, the data is the 2 bytes "10", [Hex = 31h, 30h / Decimal = 49, 48].
  • A paper layout error may occur with (sn) of this function and with the paper layout (vertical layout (sa)) with the print reference detection when the first page is printed when the paper is replaced or after turning on the power, when a setting other than "No reference" (sm ≠ "0") is specified for paper layout (layout reference) for FS ( L   <Function 33> . For details of the paper layout error, refer to the model information.
  • The setting value of this function is enabled until the following operations are executed. It is not initialized by ESC @. The setting value for this function is the saved data of GS ( M   <Function 1> .
    • Executing this function
    • Turning off the power or resetting the printer
  • The setting value of this function affects the detection of paper layout error with the following operation.
    • When closing the cover
    • When turning on the power or resetting the printer
  • The setting values are valid when "Paper position immediately after specific state" is set as "Print starting position".
  • (Specific state: when the cover is closed, when the power is turned on, and when the printer is reset)
  • Increase of the special margin may cause increase of shift of print position.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Printing Paper Commands »
  5. Label and black mark control »
  6. FS ( L   <Function 80>

Jump to the top