1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Printing Paper Commands »
  5. Label and black mark control »
  6. FS ( L   <Function 34>

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

FS ( L   <Function 34>

[Name]

Paper layout information transmission

[Format]

ASCII
   
FS
  
(
  
L
  
pL
  
pH
  
fn
  
n
Hex
1C
28
4C
02
00
22
n
Decimal
28
40
76
2
0
34
n

[Range]

(pL + pH × 256) = 2
fn = 34
n = 64, 80

[Default]

None

[Description]

Transmits paper layout information specified by n.
n
Paper layout information type
64
Paper layout setting value (unit: 0.1 mm)
80
Paper layout effective value (unit: dots)

[Notes]

  • With this function, the [Header - NUL] shown below is transmitted.
  • Send data
    Hex
    Decimal
    Number of bytes
    Header
    37h
    55
    1 byte
    Identifier
    4Bh
    75
    1 byte
    Information type (∗1)
    30h – 39h
    48 – 57
    2 bytes
    Separator
    1Fh
    31
    1 byte
    Layout information (∗2)
    Layout reference (sm)
    30h – 33h
    48 – 51
    0 or 1 byte
    Separator
    1Fh
    31
    1 byte
    Vertical layout (sa)
    30h – 39h
    48 – 57
    0 – 5 bytes
    Separator
    1Fh
    31
    1 byte
    Vertical layout (sb)
    2Dh, 30h – 39h
    45,48 – 57
    0 – 5 bytes
    Separator
    1Fh
    31
    1 byte
    Vertical layout (sc)
    2Dh, 30h – 39h
    45,48 – 57
    0 – 5 bytes
    Separator
    1Fh
    31
    1 byte
    Vertical layout (sd)
    30h – 39h
    48 – 57
    0 – 5 bytes
    Separator
    1Fh
    31
    1 byte
    Vertical layout (se)
    2Dh, 30h – 39h
    45,48 – 57
    0 – 5 bytes
    Separator
    1Fh
    31
    1 byte
    Horizontal layout (sf)
    30h – 39h
    48 – 57
    0 – 5 bytes
    NUL
    00h
    0
    1 byte
  • (∗1) 
    [Information type] is the parameter of this function (n) expressed as a decimal, converted to text data and sent from high-order bytes first.
    Example: 
    When (n = 64) is the setting value for [Information type], the data is the 2 bytes "64" [Hex = 36h, 34h / Decimal = 54, 52].
    When (n = 80) is the effective value for [Information type], the data is the 2 bytes "80" [Hex = 36h, 30h / Decimal = 56, 48].
    (∗2) 
    (sm – sf) of [Layout information] corresponds to (sm – sf) of FS ( L   <Function 33> of this command. Each item of information expressed as decimals is converted to text data and the high-order values are transmitted first.
    Example: 
    When [Vertical layout (sb) is 15, the data is the 2 bytes "15" [Hex = 31h, 35h / Decimal = 49,53].
  • The transmission data when a setting value (n = 64) is specified for information type is as follows.
    • The setting value indicates the paper layout information (the setting value of FS ( L   <Function 33> of this command) saved in memory.
    • When the first item of data of each layout information is "-" [Hex = 2Dh / Decimal = 45], it indicates a negative number.
  • The transmission data when an effective value (n = 80) is specified for information type is as follows.
    • The effective value indicates the value, calculated based on the following values, that is actually used for the operation. The unit is 1 dot.
      • The paper layout information (the setting value of FS ( L   <Function 33> of this command) saved in memory
      • The specified value for the mechanical configuration (minimum pitch etc.)
    • The effective value for horizontal layout (sf) is indicated by the horizontal size of the printable area, calculated from the horizontal layout (sf) and layout reference (sm) set.
  • For a description of transmission of the data group, refer to [Description: Applied to transmission of the data group].
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Printing Paper Commands »
  5. Label and black mark control »
  6. FS ( L   <Function 34>

Jump to the top