1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. User setup »
  6. GS ( E   <Function 2>

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS ( E   <Function 2>

[Name]

End the user setting mode session

[Format]

ASCII
   
GS
  
(
  
E
  
pL
  
pH
  
fn
  
d1
  
d2
  
d3
Hex
1D
28
45
04
00
02
4F
55
54
Decimal
29
40
69
4
0
2
79
85
84

[Range]

(pL + pH × 256) = 4
fn = 2
d1 = 79 (Character "O")
d2 = 85 (Character "U")
d3 = 84 (Character "T")

[Description]

Ends the user setting mode, and performs a software reset.

[Notes]

  • This function is performed when the printer is in user setting mode.
  • After the software reset, the printer goes into the power on state.
  • Clears the receive and print buffers.
  • Resets all command setting values in RAM (the print area, the character styles, and others) to their status at power−on.(The data in the NV memory is not reset.)
  • Executing this function enables setting values set in user setting mode (such as memory switch or customize value).
  • Be sure to execute this function after changing all the setting values.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. User setup »
  6. GS ( E   <Function 2>

Jump to the top