1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Print Commands »
  5. ESC d

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20X
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82X
  • TM-T83III
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

ESC d

[Name]

Print and feed n lines

[Format]

ASCII
   
ESC
  
d
  
n
Hex
1B
64
n
Decimal
27
100
n

[Range]

n = 0 – 255

[Default]

None

[Description]

Prints the data in the print buffer and feeds n lines.

[Notes]

  • The amount of paper fed per line is based on the value set using the line spacing command (ESC 2 or ESC 3).
  • The maximum paper feed amount depends on the printer model. If specified over the maximum amount, the maximum paper feed is executed.
  • After printing, the print postion is moved to left side of the printable area. Also, the printer is in the status "Beginning of the line".
  • When this command is processed in Page mode, only the print position moves, and the printer does not perform actual printing.
  • This command is used to temporarily feed a specific line without changing the line spacing set by other commands.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Print Commands »
  5. ESC d

Jump to the top