1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Bit Image Commands »
  5. Bit Image »
  6. GS *   [obsolete command]

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS *   [obsolete command]

[Name]

Define downloaded bit image

[Format]

ASCII
   
GS
  
*
  
x
  
y
  
d1...d(x × y × 8)
Hex
1D
2A
x
y
d1...d(x × y × 8)
Decimal
29
42
x
y
d1...d(x × y × 8)

[Range]

d = 0 – 255
k = x × y × 8
x = 1 – 255
y: different depending on the printers

[Default]

None

[Description]

Defines the downloaded bit image in the downloaded graphic area.
  • x specifies the number of bytes in horizontal direction as x bytes.
  • y specifies the number of bytes in vertical direction as y bytes.
  • d specifies the bit image data (column format).
  • k indicates the number of the definition data. k is an explanation parameter; therefore, it does not need to be transmitted.

[Recommended Functions]

This command is supported only by some printer models and may not be supported by future models.
It is recommended that download graphics function (GS ( L   /   GS 8 L: GS ( L   <Function 52> and GS ( L   <Function 80> – GS ( L   <Function 85> ) be used because they offer the following additional features:
  • Multiple number of logo data and mark data can be specified (except for some models).
  • Data control by key code is possible.
  • Redefining or deleting the same data is possible for each key code.
  • Selecting a color for printing is possible.
  • Defining data by raster format is possible.
  • The remaining capacity of the definition area can be confirmed.

[Notes]

  • Data (d) specifies a bit printed to 1 and not printed to 0.
  • The downloaded bit image is not defined as the default.
  • Once a downloaded bit image has been defined, it is available until another definition is made, ESC @ is executed, the printer is reset, or the power is turned off.
  • On some models a downloaded bit image and a user-defined characterESC & cannot be defined simultaneously.
    • When this command is executed, the user-defined character is cleared.
    • When ESC & is executed, the downloaded bit image data is cleared.
  • The downloaded bit image is printed by GS /   [obsolete command] .
  • The relationship between bit image data and print result is as follows.
  • Graphic
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Bit Image Commands »
  5. Bit Image »
  6. GS *   [obsolete command]

Jump to the top