Select your printer model

Parameters are refined by the selected printer.

EU-m30
TM-J2000
TM-J2100
TM-L90
TM-L90 LFC
TM-L100
TM-m10
TM-m30
TM-m30II
TM-m30II-H
TM-m30III
TM-m30III-H
TM-m30II-NT
TM-m30II-S
TM-m30II-SL
TM-m50
TM-m50II
TM-m50II-H
TM-P20
TM-P20II
TM-P60
TM-P60II
TM-P80
TM-P80II
TM-T20
TM-T20II
TM-T20III
TM-T20IIIL
TM-T20IV-L
TM-T20X
TM-T20X-II
TM-T70
TM-T70II
TM-T81III
TM-T82II
TM-T82III
TM-T82IIIL
TM-T82IV-L
TM-T82X
TM-T82X-II
TM-T83III
TM-T83IV
TM-T88IV
TM-T88V
TM-T88VI
TM-T88VII
TM-T90
TM-T100
TM-U220
TM-U220II
TM-U230

DLE DC4 (fn=3)

[Name]

Sound buzzer in real-time

[Format]

ASCII

DLE

DC4

Hex

Decimal

[Range]

fn = 3

a, n, r, t1, t2: different depending on the printers.

, EU-m30, TM-L100, TM-m10, TM-m30, TM-m30II, TM-m30II-H, TM-m30III, TM-m30III-H, TM-m30II-NT, TM-m30II-S, TM-m30II-SL, TM-m50, TM-m50II, TM-m50II-H, TM-T20, TM-T20II, TM-T20III, TM-T20IIIL, TM-T20IV-L, TM-T20X, TM-T20X-II, TM-T70II, TM-T81III, TM-T82II, TM-T82III, TM-T82IIIL, TM-T82IV-L, TM-T82X, TM-T82X-II, TM-T83III, TM-T83IV, TM-T88V, TM-T88VI, TM-T88VII, TM-T100, TM-U220II:

a = 0, n = 0, r = 0, t1 = 1, t2 = 0

[Description]

Sounds the buzzer with a sound pattern specified by a the number of times specified by r.

When a = 0, stops sounding the buzzer.
When r = 0, repeats a sound pattern specified by a infinitely.

[Notes]

This is a Real-time command. Refer to Notes of Real-time Commands for usage note.
This command can be used after enabling real time command processing with GS ( D.
The function of not sounding the buzzer affects autonomous buzzer sound (errors, paper-end) and buzzer sound with ESC ( A <Function 97> , buzzer sound during cutting, buzzer sound by generating the specified pulse.

, EU-m30:

This command is valid only for specific models equipped with a drawer kick connector.

This command stops sound of the optional external buzzer.
The following Buzzer sound termination response is transmitted after the sound stop.

	Hex	Decimal	Number of bytes
Header	37h	55	1 byte
Identifier	54h	84	1 byte
Data	40h	64	1 byte
NUL	00h	0	1 byte

Hex

Decimal

Number of bytes

Header

37h

1 byte

Identifier

54h

1 byte

Data

40h

1 byte

NUL

00h

1 byte

When the optional external buzzer is disabled by GS ( E <Function 5> (a = 119), only the response will be transmitted.

, TM-m10, TM-m30, TM-m30II, TM-m30II-H, TM-m30III, TM-m30III-H, TM-m30II-NT, TM-m30II-S, TM-m30II-SL, TM-m50, TM-m50II, TM-m50II-H, TM-T20, TM-T20II, TM-T20III, TM-T70II, TM-T88V, TM-T88VI, TM-T88VII, TM-U220II:

This command stops sound of the optional external buzzer.
The following Buzzer sound termination response is transmitted after the sound stop.

	Hex	Decimal	Number of bytes
Header	37h	55	1 byte
Identifier	54h	84	1 byte
Data	40h	64	1 byte
NUL	00h	0	1 byte

Hex

Decimal

Number of bytes

Header

37h

1 byte

Identifier

54h

1 byte

Data

40h

1 byte

NUL

00h

1 byte

When the optional external buzzer is disabled by GS ( E <Function 5> (a = 119), only the response will be transmitted.

, TM-L100:

This command stops sound of the buzzer.
Stops the buzzer when it sounds due to an automatic sounding (error, paper-end), ESC ( A <Function 97> , cut operation, or the pulse.
The following Buzzer sound termination response is transmitted after the sound stop.

	Hex	Decimal	Number of bytes
Header	37h	55	1 byte
Identifier	54h	84	1 byte
Data	40h	64	1 byte
NUL	00h	0	1 byte

Hex

Decimal

Number of bytes

Header

37h

1 byte

Identifier

54h

1 byte

Data

40h

1 byte

NUL

00h

1 byte

, TM-T20IIIL, TM-T20IV-L, TM-T20X, TM-T20X-II, TM-T81III, TM-T82IIIL, TM-T82IV-L, TM-T82X, TM-T82X-II, TM-T83III, TM-T83IV, TM-T100:

Stops sounding the optional external buzzer. Stops the buzzer when it sounds due to an automatic sounding (error, paper-end), ESC ( A <Function 97> , cut operation, or the pulse.
The buzzer stop response shown below is sent after the buzzer is stopped.

	Hex	Decimal	Number of bytes
Header	37h	55	1 byte
Identifier	54h	84	1 byte
Data	40h	64	1 byte
NUL	00h	0	1 byte

Hex

Decimal

Number of bytes

Header

37h

1 byte

Identifier

54h

1 byte

Data

40h

1 byte

NUL

00h

1 byte

When the optional external buzzer is disabled by GS ( E <Function 5> (a = 119), only the response will be transmitted.

, TM-T82II:

This command stops sound of the buzzer that is set to "Enabled" by GS ( E <Function 5> (a = 119).
The following Buzzer sound termination response is transmitted after the sound stop.

	Hex	Decimal	Number of bytes
Header	37h	55	1 byte
Identifier	54h	84	1 byte
Data	40h	64	1 byte
NUL	00h	0	1 byte

Hex

Decimal

Number of bytes

Header

37h

1 byte

Identifier

54h

1 byte

Data

40h

1 byte

NUL

00h

1 byte

When the buzzer is disabled by GS ( E <Function 5> (a = 119), only the response will be transmitted.

, TM-T82III:

This command stops sound of the optional external and internal buzzers.
The following Buzzer sound termination response is transmitted after the sound stop.

	Hex	Decimal	Number of bytes
Header	37h	55	1 byte
Identifier	54h	84	1 byte
Data	40h	64	1 byte
NUL	00h	0	1 byte

Hex

Decimal

Number of bytes

Header

37h

1 byte

Identifier

54h

1 byte

Data

40h

1 byte

NUL

00h

1 byte

This command Stops the buzzer when it sounds due to an automatic sounding (error, paper-end), ESC ( A <Function 97> , cut operation, or the pulse.
When the optional external and internal buzzers are disabled by GS ( E <Function 5> (a = 119), only the response will be transmitted.

Quick Access

[Name]
[Format]
[Range]
[Description]
[Notes]

ESC/POS^® includes patented or patent pending commands. The contents must not be disclosed to third parties.

ESC/POS^® Command Reference for TM Printers

Introduction
Command Lists
- Commands in Code Order
- Applicable printers
- Command List by Model
  - EU-m30
  - TM-J2000, TM-J2100
  - TM-L90
  - TM-L90 LFC
  - TM-L100
  - TM-m10
  - TM-m30
  - TM-m30II
  - TM-m30II-H
  - TM-m30II-NT
  - TM-m30II-S
  - TM-m30II-SL
  - TM-m30III
  - TM-m30III-H
  - TM-m50
  - TM-m50II
  - TM-m50II-H
  - TM-P20
  - TM-P20II
  - TM-P60
  - TM-P60II
  - TM-P80
  - TM-P80II
  - TM-T100
  - TM-T20
  - TM-T20II
  - TM-T20III
  - TM-T20IIIL
  - TM-T20IV-L
  - TM-T20X
  - TM-T20X-II
  - TM-T70
  - TM-T70II
  - TM-T81III
  - TM-T82II
  - TM-T82III
  - TM-T82IIIL
  - TM-T82IV-L
  - TM-T82X
  - TM-T82X-II
  - TM-T83III
  - TM-T83IV
  - TM-T88IV
  - TM-T88V
  - TM-T88VI
  - TM-T88VII
  - TM-T90
  - TM-U220
  - TM-U220II
  - TM-U230
- Obsolete Commands
Commands Arranged by Function
- Print Commands
  - LF
  - FF (in Page mode)
  - FF (in Standard mode)
  - CR
  - ESC FF
  - ESC J
  - ESC K
  - ESC d
  - ESC e
- Line Spacing Commands
  - ESC 2
  - ESC 3
- Character Commands
  - CAN
  - ESC SP
  - ESC !
  - ESC -
  - ESC E
  - ESC G
  - ESC M
  - ESC R
  - ESC V
  - ESC r
  - ESC t
  - ESC {
  - GS !
  - GS B
  - GS b
  - - Character effects
    - User-defined characters
      - ESC %
      - ESC &
      - ESC ?
    - Code conversion method
- Printing Paper Commands
  - Label and black mark control
- Print Position Commands
  - HT
  - ESC $
  - ESC D
  - ESC T
  - ESC W
  - ESC \
  - ESC a
  - GS $
  - GS L
  - GS T
  - GS W
  - GS \
- Paper Sensor Commands
  - ESC c 3
  - ESC c 4
- Mechanism Control Commands
  - ESC <
  - ESC U
  - ESC i
  - ESC m
  - ESC i
  - GS ( V <fn=48>
  - GS ( V <fn=49>
  - GS ( V <fn=51>
  - GS V
- Bit Image Commands
  - Bit Image
    - ESC *
    - FS p
    - FS q
    - GS *
    - GS /
    - GS Q 0
    - GS v 0
  - GS ( L / GS 8 L
  - GS D
  - Graphics
  - NV Graphics
  - Download Graphics
- Panel Button Commands
  - ESC c 5
- Status Commands
  - DLE EOT
  - ESC u
  - ESC v
  - FS ( e
  - GS a
  - GS j
  - GS r
- Barcode Commands
  - GS H
  - GS f
  - GS h
  - GS k
  - GS w
- Two-dimensional Code Commands
  - GS ( k
  - - PDF417
    - QR Code
    - MaxiCode
    - 2-dimensional GS1 DataBar
    - Composite Symbology
    - Aztec Code
    - DataMatrix
- Macro Function Commands
  - GS :
  - GS ^
- Kanji Commands
  - FS !
  - FS &
  - FS -
  - FS .
  - FS 2
  - FS ?
  - FS C
  - FS S
  - FS W
  - Kanji character effects
    - FS ( A
    - FS ( A <fn=48>
- Miscellaneous Commands
  - DLE ENQ
  - DLE DC4 <fn=1>
  - DLE DC4 <fn=2>
  - DLE DC4 <fn=3>
  - DLE DC4 <fn=7>
  - DLE DC4 <fn=8>
  - ESC ( Y
  - ESC =
  - ESC @
  - ESC L
  - ESC S
  - ESC p
  - GS ( A
  - GS ( D
  - GS I
  - GS P
  - GS g 0
  - GS g 2
  - GS z 0
  - Response or status transmission
    - GS ( H
    - GS ( H <fn=48>
    - GS ( H <fn=49>
  - Print control methods
    - GS ( K
    - GS ( K <fn=48>
    - GS ( K <fn=49>
    - GS ( K <fn=50>
    - GS ( K <fn=97>
  - Beeper tone control
    - ESC ( A
    - ESC ( A <fn=48>
    - ESC ( A <fn=97>
    - ESC ( A <fn=98>
    - ESC ( A <fn=99>
  - Graphics drawing
    - GS ( Q
    - GS ( Q <fn=48>
    - GS ( Q <fn=49>
  - Receipt enhancement control
    - FS ( E
    - FS ( E <fn=60>
    - FS ( E <fn=61>
    - FS ( E <fn=62>
    - FS ( E <fn=63>
    - FS ( E <fn=64>
    - FS ( E <fn=65>
  - Page mode control
    - GS ( P
    - GS ( P <fn=48>
- Customize Commands
  - User setup
  - Printer customization
  - NV user memory
    - FS g 1
    - FS g 2
    - Edit NV user memory
- Counter Printing Commands
  - GS C 0
  - GS C 1
  - GS C 2
  - GS C ;
  - GS c
Programming Examples
Appendixes