1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Print Position Commands »
  5. ESC T

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20X
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82X
  • TM-T83III
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U230

ESC T

[Name]

Select print direction in Page mode

[Format]

ASCII
   
ESC
  
T
  
n
Hex
1B
54
n
Decimal
27
84
n

[Range]

n = 0 – 3, 48 – 51

[Default]

n = 0

[Description]

in Page mode, selects the print direction and starting position using n as follows:
Graphic

[Notes]

  • The print direction set by this command is effective only in Page mode.
  • This command setting has no effect in Standard mode.
  • The parameters for the horizontal or vertical motion unit differ, depending on the starting position of the print area as follows:
    • If the starting position is the upper left or lower right of the print area:
    • These commands use horizontal motion units: ESC SP, ESC $, ESC \, FS S
    • These commands use vertical motion units: ESC 3, ESC J, ESC K, GS $, GS \
    • If the starting position is the upper right or lower left of the print area:
    • These commands use horizontal motion units: ESC 3, ESC J, ESC K, GS $, GS \
    • These commands use vertical motion units: ESC SP, ESC $, ESC \, FS S
  • Settings of this command are effective until ESC @ is executed, the printer is reset, or the power is turned off.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Print Position Commands »
  5. ESC T

Jump to the top