1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. User setup »
  6. GS ( E   <Function 1>

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20X
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82X
  • TM-T83III
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS ( E   <Function 1>

[Name]

Change into the user setting mode

[Format]

ASCII
   
GS
  
(
  
E
  
pL
  
pH
  
fn
  
d1
  
d2
Hex
1D
28
45
03
00
01
49
4E
Decimal
29
40
69
3
0
1
73
78

[Range]

(pL + pH × 256) = 3
fn = 1
d1 = 73 (Character "I")
d2 = 78 (Character "N")

[Description]

Enters the user setting mode and transmits the mode change notice.
  • ESC/POS Handshaking Protocol is not required for this function.

[Notes]

  • If the printer is in Standard mode, this command is valid only at the beginning of the line.
  • If the printer is in Page mode, this command is ignored.
  • This command cannot be included in a macro definition. Do not use this command when defining a macro.
  • When the printer goes into the user setting mode, it transmits a "mode change notice" back to the host.
  • Send data
    Hex
    Decimal
    Number of bytes
    Header
    37h
    55
    1 byte
    Identifier
    20h
    32
    1 byte
    NUL
    00h
    0
    1 byte
  • When it has executed this function, send the next commands after checking the "mode change notice."
  • See [Notes for transmission process] for process sending data group.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. User setup »
  6. GS ( E   <Function 1>

Jump to the top