1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Character Commands »
  5. ESC SP

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20X
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82X
  • TM-T83III
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

ESC SP

[Name]

Set right-side character spacing

[Format]

ASCII
   
ESC
  
SP
  
n
Hex
1B
20
n
Decimal
27
32
n

[Range]

n = 0 – 255

[Default]

n = 0

[Description]

Sets the right-side character spacing to n × (horizontal or vertical motion unit).

[Notes]

  • The character spacing set by this command is effective for alphanumeric, Kana, and user-defined characters.
  • When characters are enlarged, the character spacing is n times normal value.
  • When Standard mode is selected, the horizontal motion unit is used.
  • when Page mode is selected, the vertical or horizontal motion unit is used for the print direction set by ESC T.
    • When the starting position is set to the upper left or lower right of the print area using ESC T, the horizontal motion unit is used.
    • When the starting position is set to the upper right or lower left of the print area using ESC T, the vertical motion unit is used.
  • The character spacing can be set independently in Standard mode and in Page mode.
    • In Standard mode this command sets the character spacing of Standard mode.
    • in Page mode this command sets the character spacing of page mode.
  • If the horizontal or vertical motion unit is changed after this command is executed, the character spacing is not changed.
  • Settings of this command are effective until ESC @ is executed, the printer is reset, or the power is turned off.
  • It is used to change the spacing between characters.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Character Commands »
  5. ESC SP

Jump to the top