1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. Printer customization »
  6. GS ( M   <Function 2>

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20X
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82X
  • TM-T83III
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS ( M   <Function 2>

[Name]

Load the setting values stored in the storage area to the work area

[Format]

ASCII
   
GS
  
(
  
M
  
pL
  
pH
  
fn
  
m
Hex
1D
28
4D
02
00
fn
m
Decimal
29
40
77
2
0
fn
m

[Range]

(pL + pH × 256) = 2
fn = 2, 50
m: different depending on the printers

[Description]

Loads the command setting values stored in the storage area specified by m to the work area.
  • When m = 0, 48, the default values described in this guide are applied.
  • When m ≠ 0, 48, the setting values are stored in the storage area specified by m.

[Notes]

  • This function is effective at the beginning of a line in Standard mode.
  • This command cannot be included in a macro definition. Do not use this command when defining a macro.
  • The value in the work area is set to the default value by the following:
    • Executing this function by specifying m = 0, 48.
    • Executing Function 2 with the condition that the storage area that has not executed GS ( M   <Function 1> is specified.
    • Initializing when an autoload process has been canceled by GS ( M   <Function 3> .
  • The values in the work area that are not affected by this command are not changed.
  • The values in the storage area are not changed.
  • The values affected by this command are different, depending on the printer models. See model specific information for details.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. Printer customization »
  6. GS ( M   <Function 2>

Jump to the top