1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Kanji Commands »
  5. FS S

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

FS S

[Name]

Set Kanji character spacing

[Format]

ASCII
   
FS
  
S
  
n1
  
n2
Hex
1C
53
n1
n2
Decimal
28
83
n1
n2

[Range]

n1, n2: different depending on the printers

[Default]

different depending on the printers

[Description]

Sets left- and right-side spacing of the multi-byte code character n1 and n2, respectively.
  • Sets the left-side character spacing to [n1 × horizontal or vertical motion units].
  • Sets the right-side character spacing to [n2 × horizontal or vertical motion units].

[Notes]

  • Settings of this command affect multilingual characters and user-defined characters.
  • When a character size is set to N times as large as a normal size, both right- and left-side character spacings are also set to N times as large as a normal size.
  • In Standard mode, the horizontal motion unit (perpendicular to the paper feed direction) is used.
  • in Page mode, the horizontal or vertical motion unit differs, depending on the starting position set by ESC T.
    • When the starting position is set to the upper left or lower right, the horizontal motion unit (perpendicular to the paper feed direction) is used.
    • When the starting position is set to the upper right or lower left, the vertical motion unit (paper feed direction) is used.
  • Different character spacing can be set for Standard mode and page mode.
    • When this command is set in Standard mode, character spacing for multilingual (except Thai) characters printed in Standard mode is set.
    • When this command is set in Page mode, character spacing for multilingual (except Thai) characters printed in Page mode is set.
  • If the horizontal or vertical motion unit is changed after setting the character spacing, the spacing between the characters is not changed.
  • The character spacing is effective until ESC @ is executed, the printer is reset, or the power is turned off.
  • This command is used to change spacing between characters.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Kanji Commands »
  5. FS S

Jump to the top