ESC L

This command is enabled only when processed at the beginning of the line in Standard mode. In other cases, this command is ignored.

The print position is the starting position specified by ESC T within the print area defined by ESC W.

The following commands switch the settings for Page modebecause these commands can be set independently in Standard mode and in Page mode:

• ESC SP, ESC 2, ESC 3, ESC U, and FS S

The following commands are disabled in Page mode.

• ESC L, FS g 1   [obsolete command] , FS q   [obsolete command] , GS ( A, GS ( C (part of functions), GS ( E, GS ( L   /   GS 8 L (part of functions), GS ( M (part of functions), GS ( P, GS T, and GS g 0

The following commands are not effective in Page mode.

• ESC V, ESC a, ESC {, GS L, and GS W

The printer returns to Standard mode with ESC S, FF (in Page mode), and ESC @. When it returns to Standard mode by ESC @, all settings are canceled.

Standard mode is selected as the default.

in Page mode, the printer prints the data in the print buffer for the print area specified by ESC W collectively by FF (in Page mode) or ESC FF. When executing the print and paper feed commands, such as LF, CR, ESC J, and ESC d, only the print position moves; the printer does not perform actual printing.