1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Print Position Commands »
  5. GS T

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS T

[Name]

Set print position to the beginning of print line

[Format]

ASCII
   
GS
  
T
  
n
Hex
1D
54
n
Decimal
29
84
n

[Range]

n = 0, 1, 48, 49

[Default]

None

[Description]

In Standard mode, moves the print position to the beginning of the print line after performing the operation specified by n. n specifies the data processing in the print buffer when this command is executed.
n
Function
0, 48
Erases the data in the print buffer then moves the print position.
1, 49
Prints the data in the print buffer then moves the print position.

[Notes]

  • When printing is specified (n = 1, 49), prints the data in the print buffer and starts a new line based on the set line spacing.
  • When erasure is specified (n = 0, 48), executes cancel processing for the print data currently in the print buffer and maintains other data and settings.
  • in Page mode, this command is ignored.
  • This command is ignored if the print position is already the beginning of the line.
  • If the print position is not set to the beginning of the line, when n = 1, 49, this command functions the same as LF.
  • When erasure is specified (n = 0, 48), executes cancelprocessing for the print data currently in the print buffer and maintains other data and settings.
  • Setting values of each command, definitions, and receive buffer content are not changed.
  • The command execution moves the print position to left side of the printable area. Also, the printer is in the status "Beginning of the line".
  • When using commands that are enabled only at the beginning of the line, these commands are sure to be executed if this command is used immediately before using those commands.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Print Position Commands »
  5. GS T

Jump to the top