1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Print Position Commands »
  5. ESC \

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20X
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82X
  • TM-T83III
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

ESC \

[Name]

Set relative print position

[Format]

ASCII
   
ESC
  
\
  
nL
  
nH
Hex
1B
5C
nL
nH
Decimal
27
92
nL
nH

[Range]

(nL + nH × 256) = -32768 – 32767

[Default]

None

[Description]

Moves the print position to (nL + nH × 256) × (horizontal or vertical motion unit) from the current position.

[Notes]

  • The printer ignores any setting that exceeds the print area.
  • A positive number specifies movement to the right, and a negative number specifies movement to the left.
  • When Standard mode is selected, the horizontal motion unit is used.
  • when Page mode is selected, the horizontal or vertical motion unit is used for the print direction set by ESC T.
    • When the starting position is set to the upper left or lower right of the print area using ESC T, the horizontal motion unit is used.
    • When the starting position is set to the upper right or lower left of the print area using ESC T, the vertical motion unit is used.
  • Even if the vertical or horizontal motion unit is changed after changing the print position, the setting of the print position will not be changed.
  • When underline mode is turned on, the underline will not be printed under the space skipped by this command.
  • "\" corresponds to "¥" in the JIS code system.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Print Position Commands »
  5. ESC \

Jump to the top